Let's have some Grout talk

This was mm2 today it doesn't have a long pot life but you can apply it then wash it off literally a couple of mins later. Some times with tilemaster you can be waiting half hour or more before it's ready to wash off. The palace stuff was really nice to use although I'm not sure how good it actually is
I have used palace grout in the past ( years ago) haven't been called back yet .
 
Used to like Norcross but no one sells it up here now. Did like the Butech stuff that Porcelanosa supplied with a 200 metre job.
 
IMG_3267.JPG

I always keep some in the van, just incase!
 
I started having trouble with Mapei ucp grey 112 drying different shades and white 100 drying greyish and all colours very sandy finish and slides off grout float.Switched to BAL mm2 but drys too quickly and lot of wastage. Now using Weber projoint and no probs at all, nice to work with, smooth finish and drys nicely.

Sorry you have had problems with the Mapei Ultracolor Plus. Should you ever use the product again and would like for a Mapei representative to be present please let us know and we will endeavor to assist.
 
Sorry you have had problems with the Mapei Ultracolor Plus. Should you ever use the product again and would like for a Mapei representative to be present please let us know and we will endeavor to assist.
Ucp and kerracolour are well known for drying different shades . Often we hear things about make sure you double knock it when mixing . Shake the bag before use and the best one don't over wet which is pretty much impossible as a lot of tiles require an awful lot of cleaning to get them clean because the grout dries on the face of the tiles a lot sooner than it stiffens up in the joint .
 
Sorry you have had problems with the Mapei Ultracolor Plus. Should you ever use the product again and would like for a Mapei representative to be present please let us know and we will endeavor to assist.
Not the only tiler on here to have had trouble with ucp gris drying blotchy and having to fine sand joints, good few on here and I personally know another 3 tilers up here having to do same.
 
Not the only tiler on here to have had trouble with ucp gris drying blotchy and having to fine sand joints, good few on here and I personally know another 3 tilers up here having to do same.
I am regular user of UCP and over the last 10 years or so I can recollect only 2 occasions where I have had problems and they were down to grout haze caused by cold atmospheric conditions and textured glass mosaics (I was never going to win that one anyway)
So, speak as you find!
 

Advertisement

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 5.2%
  • Kerakoll

    Votes: 17 9.9%
  • Ardex

    Votes: 12 7.0%
  • Mapei

    Votes: 49 28.5%
  • Ultra Tile

    Votes: 21 12.2%
  • BAL

    Votes: 40 23.3%
  • Wedi

    Votes: 4 2.3%
  • Benfer

    Votes: 5 2.9%
  • Tilemaster

    Votes: 24 14.0%
  • Weber

    Votes: 19 11.0%
  • Other (any other brand not listed)

    Votes: 17 9.9%
  • Nicobond

    Votes: 8 4.7%
  • Norcros

    Votes: 2 1.2%
  • Kelmore

    Votes: 5 2.9%
Back
Top