Discuss Looking To Start Tiling in the Canada Tile Advice area at TilersForums.com.

dynamictiling

TF
Esteemed
167
578
glasgow
20m bathroom including the floor, say 16m walls 4m floor, in one day. Even with easy ceramics that's a lot


It's not really.... 8 hours graft in day. 20 metres in a bathroom, 2 hours to grout it. An hour break leaves 5 hours. 20÷5=4. So that works out at 4 metres an hour. Hardly alot
 

dynamictiling

TF
Esteemed
167
578
glasgow
they generally take me by my self 2 days with a polish off on the 3rd morning....ie 2.1 days.....my standards are on (Hull bathrooms the bathroom specialists) take a look i,ve never been judged by any other tiler before


Far quicker giving it a second wash than polishing it. Less dust and with polishing if the grout hasn't set you could damage the grout.
 
D

dave l and l

U having a laugh mate? There is nothing wrong with a bit of speed and precision. I have uploaded various projects on here I have done. Feel free to have a look through them and spot any bits that are ' as rough as arse oles' out of curiosity, how long would a plain and simple 20m2 bathroom take you? A week? A month?...
i think tiling and grouting 20 m2 same day is asking alot for me personally , i would have to be cutting corners somewhere along the lines.
just out of wandering i looked at your pics, do you not mitre your trims,
 

dynamictiling

TF
Esteemed
167
578
glasgow
i think tiling and grouting 20 m2 same day is asking alot for me personally , i would have to be cutting corners somewhere along the lines.
just out of wandering i looked at your pics, do you not mitre your trims,


Unless a customer asks I don't mitre my trim. Always use straight edge trim.
 

dynamictiling

TF
Esteemed
167
578
glasgow
I suppose there must be differences here and there, for example, i would cut the tiles neatly into the slope and chamfer the back off them so they sit flush, the trim doesn't work for me. I always mitre trims too, it's all extra time.

http://www.tilersforums.com/media/dynamic-tiling-ltd.14060/download

They two trims in the picture at the boxing in. There is no otherway to do them apart from straight. The trim at the box was cut straight as they are 'framless' doors (I will try and dig out a picture of the outside of the door).

That bathroom in question took 6 days in total. From a shell to complete makeover. 2 and a half days to tile, that included the boxing in, putting cement boards down and under floor heating down. The one downstairs took nearly 4 days to tile (ceilings were over 3 metres high!)

Ultimately these were high end bathroom installs. When you taking 5 grand plus off of someone for a bathroom, it has got to be perfect.
 

dynamictiling

TF
Esteemed
167
578
glasgow
I don't class 5k as a high end bathroom really, just average price.
I was referring to the trim on top of the tiles that meets the slope. The rest looks good!


The labour was 5k, with that i supplied adhesive, grout, trim ufh, plumbing fixings and waterproof matting. Materials were roughly 4 and a half. I am not really sure what you mean about the slope?
 

Reply to Looking To Start Tiling in the Canada Tile Advice area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

    • Like
Hello, I did some reading here and there, but the opinions seem to diverge at some point and I...
Replies
2
Views
1K
I'm Looking For This Tile Looking for Mardin / Mardin Gold Tiles
Hi, we've recently had a wet room leak and have had to pull up some tiles. I'm looking for some...
Replies
0
Views
905
    • Like
Hello, first post, asking about career change and possible entry route into the industry. I know...
Replies
2
Views
1K
Hi guys, I've had a bit of an issue on a job I've been doing recently. We finished tiling on...
Replies
8
Views
3K
Hello, Just joined the forum and am hoping to get some advice on a project. I live in San...
Replies
2
Views
4K

Advertisement

Thread Information

Title
Looking To Start Tiling
Prefix
N/A
Forum
Canada Tile Advice
Start date
Last reply date
Replies
60

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 5.8%
  • Kerakoll

    Votes: 15 9.7%
  • Ardex

    Votes: 11 7.1%
  • Mapei

    Votes: 45 29.0%
  • Ultra Tile

    Votes: 19 12.3%
  • BAL

    Votes: 37 23.9%
  • Wedi

    Votes: 4 2.6%
  • Benfer

    Votes: 2 1.3%
  • Tilemaster

    Votes: 21 13.5%
  • Weber

    Votes: 18 11.6%
  • Other (any other brand not listed)

    Votes: 17 11.0%
  • Nicobond

    Votes: 7 4.5%
  • Norcros

    Votes: 3 1.9%
  • Kelmore

    Votes: 4 2.6%
Top