Matting question

[Wesley]

All, I am about to start a job and plan on using Ditra 25 over concrete. Talking to my local, very good supplier, he has suggested I try a new Ardex product under the Ditra matting. I didn’t get the name but he described it as like a sticky glue that can be troweled directly onto ‘crete before laying out matting. Has anyone used a “glue” type product under matting ?, I have previously only used thin set under matting !. Any thoughts ?!.

 

[J Sid]

AF200 plus it's called and not that new. Yes used it and works will. Much preferred the old AF200. I'd stick to thin set if that's what you you have used before on screed. I use the AF 200 on gypsum screeds

 

[Tile Fix Direct]

We sell a lot of the Ardex AF200 in small and large tubs if interested;

Ardex AF200 Plus Matting Bonding Adhesive - 6kg & 14kg | Tile Fix Direct

Ardex AF200 Plus Matting Bonding Adhesive - 6kg & 14kg from Tile Fix. Find Ardex products in our huge range of Tiling Supplies. Free delivery on orders over £150.

www.tilefixdirect.com

 

[Wesley]

AF200 plus it's called and not that new. Yes used it and works will. Much preferred the old AF200. I'd stick to thin set if that's what you you have used before on screed. I use the AF 200 on gypsum screeds

AF200 plus it's called and not that new. Yes used it and works will. Much preferred the old AF200. I'd stick to thin set if that's what you you have used before on screed. I use the AF 200 on gypsum screeds

Thanks Julian, looking at the Ardex info it does look simple and quicker to use and only a few £’s more than usual adhesive !. Think I might give it a try for this job, just to see how how it goes. What size trowel do you use to spread the material ?, is a 4.5 x 4.5 sq notch trowel suitable ?. Thanks

 

[J Sid]

Normally comes with a spreader

 

[Tile Fix Direct]

Thanks Julian, looking at the Ardex info it does look simple and quicker to use and only a few £’s more than usual adhesive !. Think I might give it a try for this job, just to see how how it goes. What size trowel do you use to spread the material ?, is a 4.5 x 4.5 sq notch trowel suitable ?. Thanks

Approximately 45m2 per 14kg tub using a B1 or 2mm x 6mm v-notch trowel
tech sheet

ARDEX AF 200 PLUS - Ready Mixed Uncoupling Matting Adhesive

ardex.co.uk

 

[Dumbo]

I've seen the glue used before and the screed was screed which had quite an open finish and the tiler had problems with the mat detaching , i imagine the smoother the screed the better it works .

 

[Tiler Durden]

Exactly what I was thinking, jcr. You’ll lose a lot of adhesive in the pits and hollows of the screed unless it’s a smooth screed/timber/tilebacker board.

 

[Dumbo]

Also as we all know time is money and I reckon I would be able to spread 10m of c2 whsterever you like a lot faster than ardex af 200