Metro tiled corners, scribe in and best Silicon method?

[hmtiling]

So is it just me who follows a small cut with a big cut on internal and external corners with metros?

 

[JMC tiling]

So is it just me who follows a small cut with a big cut on internal and external corners with metros?

I try to wrap it around if the cuts all work out, makes it flow much better although sometimes not possible due to setting out.

 

[Flintstone]

wrap them round if possible

 

[Time's Ran Out]

So is it just me who follows a small cut with a big cut on internal and external corners with metros?

I'd assume there are 2 ways to do them.
1. In bricklaying a full brick and a half brick.
2. In wallpapering follow the pattern around ie. into the corner with a half out of the corner with a half.

 

[JMC tiling]

Done this on Thursday/Friday and managed to wrap it around nicely which I reckon gives it a nicer finish. Just the white Silicon in corners to do. The diamond effect you get in corners is annoying but the white Silicon IMO does help to hide this.

 

[MW Smith Ceramics]

i usually colour match the grout with the Silicon. so grey grout means grey Silicon in corners, i also use one of the smaller profiles on Silicon tool and really take my time doing it.

Yep, I'm the same , do loads of metro white tiles and always light grey grout & I mastic internals and where tiles meet units in a grey mastic to match grout

 

[dave l and l]

i would like to see a pic of the grey grout with the white Silicon

 

[JMC tiling]

Will do Dave, not going to be Silicon for a week or so as plumber doing 2nd fix and loads of dust being created from decorators