Discuss Porcelain tile chip repair... in the Canada Tile Advice area at TilersForums.com.

Andy Allen

TF
Esteemed
Arms
18,290
1,318
Gloucester
IMG_20171118_163002.png
 
O

Old Mod

Not very deep..... Just the glaze chipped
That kit looks like it’ll be difficult to use on an edge mate, cos it’s more or less a thick liquid. That’s why they demo a hole in middle of the tile.
I think it’ll require building up layer at a time.
Don’t know how resilient it would be on an edge.
Is it a resin?
Watched the video, didn’t notice if it was or not.
A resin will have strength.
 

martin1c

TF
Arms
91
633
Cheshire
What’s that Martin?

It's a set that I found on amazon. I think it's German. You get a hot spatula powered by batteries along with a selection of different coloured resins. You start with lighter colours as a base then add dark colour until it matches the tiles.

There is a video on Youtube I believe.

I've used it to fill holes and chips and been pretty successful with it. I had to move a mirror on some porcelanosa tiles recently and when I filled the holes it was very difficult to spot them even close up.

Building up the edge of a tile is harder but possible. I added a spot of super glue to the chip then added the resin to give it strength. Then some light sanding and hey presto saved myself a lot of time and effort.
 
L

LM

As an Amazon Associate we earn from qualifying purchases.

martin1c

TF
Arms
91
633
Cheshire
As an Amazon Associate we earn from qualifying purchases.
I

Italy

It's a set that I found on amazon. I think it's German. You get a hot spatula powered by batteries along with a selection of different coloured resins. You start with lighter colours as a base then add dark colour until it matches the tiles.

There is a video on Youtube I believe.

I've used it to fill holes and chips and been pretty successful with it. I had to move a mirror on some porcelanosa tiles recently and when I filled the holes it was very difficult to spot them even close up.

Building up the edge of a tile is harder but possible. I added a spot of super glue to the chip then added the resin to give it strength. Then some light sanding and hey presto saved myself a lot of time and effort.
ordered 2 hours ago, I'll try
 

Reply to Porcelain tile chip repair... in the Canada Tile Advice area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

I need help. I need MARAZZI TRAVISANO TREVI Italian porcelain tile in 3" x 12" bullnose to...
Replies
0
Views
149
Hi don’t tbink My last thread posted . What’s the best ting. To use to repair damage left when...
Replies
0
Views
147
Hi, Looking for advice mainly on how much adhesive I should remove from between the tiles in a...
Replies
1
Views
1K
Please can anybody advise where I can purchase some Megastone zomara biege tiles 60x30 need some...
Replies
1
Views
804
Hi am re tiling kitchen and want some ideas as to what’s best to repair the walls after Remiving...
Replies
0
Views
154

Advertisement

Thread starter

Andy Allen

Esteemed
Arms
TF
Joined
Location
Gloucester

Thread Information

Title
Porcelain tile chip repair...
Prefix
N/A
Forum
Canada Tile Advice
Start date
Last reply date
Replies
54

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 5.8%
  • Kerakoll

    Votes: 15 9.7%
  • Ardex

    Votes: 11 7.1%
  • Mapei

    Votes: 45 29.0%
  • Ultra Tile

    Votes: 19 12.3%
  • BAL

    Votes: 37 23.9%
  • Wedi

    Votes: 4 2.6%
  • Benfer

    Votes: 2 1.3%
  • Tilemaster

    Votes: 21 13.5%
  • Weber

    Votes: 18 11.6%
  • Other (any other brand not listed)

    Votes: 17 11.0%
  • Nicobond

    Votes: 7 4.5%
  • Norcros

    Votes: 3 1.9%
  • Kelmore

    Votes: 4 2.6%
Top