Porcelain Tiles Chipping

[kenny mac]

Thanks folks I did some dry cuts on off cuts and now cutting the tiles upsides down a lot less chipping hardly noticeable

The £20 plasplugs with a general cutting blade dose fantastic cuts absolute madness

Thanks everyone the cuts are good enough I'm going to run with it

Cheers Kenny Mac

 

[Stef]

Do you rate the ATS blades above the montolit then Stef, just invested myself in a monti progress for the grinder?

The pro-gres is probably the best blade I have used but an ATS blade isn't far behind it & when the ATS blade is almost £30 cheaper then it's a no brainer.
Need to purchase one form Alan @ ATS & try them for yourself m8..

 

[Italy]

Hahaha..you on commission?
You should be able to give up on the tiling then soon, turn my pounds into euro's 🙂

hahaha yes.
if you continue like this.
in a few months I retire

 

[Spare Tool]

The pro-gres is probably the best blade I have used but an ATS blade isn't far behind it & when the ATS blade is almost £30 cheaper then it's a no brainer.
Need to purchase one form Alan @ ATS & try them for yourself m8..

Craig (Widler) gave me an ATS blade to try and I was very happy with the results untill some Italian guy on here 🙂 kept banging on about the monti's so thought id see what all the hype was about, as you say for nearly four fold in the price there's not a lot in it..Think the montolit slightly better but comparing price to quality its definitely not 4 times better 🙂

 

[Spare Tool]

hahaha yes.
if you continue like this.
in a few months I retire

Sell, sell, sell 🙂 retire equals more time to cycle 😉

 

[Stef]

Craig (Widler) gave me an ATS blade to try and I was very happy with the results untill some Italian guy on here 🙂 kept banging on about the monti's so thought id see what all the hype was about, as you say for nearly four fold in the price there's not a lot in it..Think the montolit slightly better but comparing price to quality its definitely not 4 times better 🙂

Couldn't have said it better myself..
Craig's a good one, always talking to him on Facebook..

 

[Spare Tool]

Couldn't have said it better myself..
Craig's a good one, always talking to him on Facebook..

No doubt he'll read this eventually so only got good things to say about the lad 🙂 ...better plasterer than tiler though 😉 haha

 

[Italy]

you are talking about two different blades.
I believe that ats be similar to this.

 

[Old Mod]

I'm sure Alan @ATSDiamondTools would send you one @antonio, if you were to buy one! 🙂

 

[Italy]

I use progres for excellent finishes.
and use TCS 115 for quick cuts and good finishes.
like to try. ats to compare tcs Montolit.