Porcelain tiles - how to finish edges

[Albert]

Some tiles aren't suitable for mitres. I would imagine the tiler isn't confident or experienced in doing it

As you are only cutting the back of the tile it really doesn't mater

 

[BJD]

Photos of back of tile and edges attached for any further comments

 

[Flintstone]

They look perfect for a mitre.

 

[Tony73]

Should be no problem for mitre. Little advice - tiler should cut mitre 1-2mm from the edge, and finish it using polisher (flex) . Cut it too close to the edge and it will chip away.

 

[Tony73]

these are 900x990x10 porcelain tiles. All mitred by hand using angle grinder and polisher.

 

[MarshallTile]

Dam fine work Tony73

 

[Tony73]

Dam fine work Tony73

Thank you 🙂

 

[rabw]

View attachment 93089 these are 900x990x10 porcelain tiles. All mitred by hand using angle grinder and polisher.

I know this is an old thread, but wow, what an inspiration. I'm going to try to achieve this in my bathroom, it'll be a first time for me. I'm a DIYer, but experienced generally.
[automerge]1600855105[/automerge]

Photos of back of tile and edges attached for any further comments

View attachment 93087 View attachment 93088

How did this work out in the end?