Guest viewing is limited

Porcelain tiles wet room Ufh heating

Tilers Forums Official Sponsors

Status
Not open for further replies.
Hi guys
A little advice if possible
I have a bathroom 2.6 x1.9 on joists 18” gaps
New weyroc floor
Ufh is on spreader plates in between and a wet board flush into the area
So my question is decoupling mat or not ?
For this size area is it needed
Will there be that much flex?
There have been extra noggins put in situ but ??
Porcelain tiles 600 x 300 going down on Mapei s9
 

Attachments

  • 7012AF40-7B8B-463D-BBB9-C62C04C9850E.jpeg
    7012AF40-7B8B-463D-BBB9-C62C04C9850E.jpeg
    551.7 KB · Views: 66
  • 53090F05-18C3-4651-8542-BAACBC916B8C.jpeg
    53090F05-18C3-4651-8542-BAACBC916B8C.jpeg
    446.7 KB · Views: 62
My advice is that the flooring is wholly inadequate to support a tiled floor. It’s ill-prepared and unsuitable to accept tiles.
HI what do you mean ?
The weyroc is 22m on 5x2 joists 18" apart The wet room tray is supported by 22mm structural ply between new joists
there are noggins to strengthen the floor and there is very little flex why is the floor wholly inadequate
You shouldbe able to clarify that statement
That's like saying the a car is unfit for the roads without explaining why!!!
 
Last edited:
The weyroc is 22m on 5x2 joists 18" apart The wet room tray is supported by 22mm structural ply between new joists
there are noggins to strengthen the floor and there is very little flex why is the floor wholly inadequate
You shouldbe able to clarify that statement
That's like saying the a car is unfit for the roads without explaining why!!!
 
No-one
Ok thanks for all your help guys.
I’ll just crack on. But pointless coming on here except to be insulted
 
The forum is a welcoming place for all. Please be respectful and polite in your replies to other members.
 
Status
Not open for further replies.

Featured Threads

Advertisement

Weekly Email Digest

Back
Top

Click Here to Register for Free / Remove Ad