Public Thread!: Poor Tiling Workmanship by DIY and Rogue Traders

[John Benton]

Trying to work out whether it was Josephs technicolor dreamcoat or Noels Multi-Coloured Swap Shop :lol: Either way, shocking

 

[mike1979]

That's my pet hate that is it drives my wild I used to work with a tiler that used to do sockets like that

 

[mike1979]

I went to sort out another bodge job today the plasterboard were that wet the bottom half fell off

 

[prceramics]

Love them lol

 

[peterwhayward]

View attachment 59126One of Manchesters more up market Hotels!

Looks like a join on the trim about 6" up from the floor as well..........nice!.

 

[widler]

Looks like a join on the trim about 6" up from the floor as well..........nice!.

Do they do 3m trims ?
Ive only ever seen 2.4m, what happens in old properties , ive always joined them

 

[Qwerty]

Schluter are one company who do them but they are pricey. Joining is the only way as widler says. Down low is preferred in most cases as not so visible, but I cut mine so they are virtually impossible to see without bending right down and inspecting closely.

 

[peterwhayward]

I was assuming it was a wet area....but on second look probably not, but if it was I would keep any joins in trims above the likely wet area.

 

[Time's Ran Out]

Check around the shower dial to see if it's been sealed.

 

[On one]

This one didn't take too long to tidy up....for obvious reasons.