Rubi tr600-opinions

[DHTiling]

A better combo..would be the tr400s and the tx700n.......or the tx40+ instead of the tr400s....but deffo the tx700n...then you will never need another dry cutter imo....unless ypu get out bigger than 700mm..then if i come across this then i know i can hire a tx1200n from CTD..

 

[doug boardley]

A better combo..would be the tr400s and the tx700n.......or the tx40+ instead of the tr400s....but deffo the tx700n...then you will never need another dry cutter imo....unless ypu get out bigger than 700mm..then if i come across this then i know i can hire a tx1200n from CTD..

unfortunately 4 me Dave there's not a ctd near me so having to bite bullet and buy tx1200n, but am sure it will pay 4 itself!

 

[DHTiling]

CTD in carlisle doug....just over the hills mate.....:lol:

 

[kaharrison9]

Thanks for all the replies,everyone very useful and most appreciated.
Listening to the views on the forum i've yet to hear a bad reveiw on the tx700 and with it having the same breaking system as the tr range I'm leaning towards combining it with the tr400.
Was not at the moment my plan to buy 2 but the thought of struggling or the uncertainty on a job while starting out in tiling is edging me towards investing.
Does anybody know of any deals on the 2 cutters at the moment?
Cheers all.
Kev

 

[doug boardley]

CTD in carlisle doug....just over the hills mate.....:lol:

cheers Dave, but if I buy one I'll be able to hire it out!! (I like buying things!)

 

[DHTiling]

Thanks for all the replies,everyone very useful and most appreciated.
Listening to the views on the forum i've yet to hear a bad reveiw on the tx700 and with it having the same breaking system as the tr range I'm leaning towards combining it with the tr400.
Was not at the moment my plan to buy 2 but the thought of struggling or the uncertainty on a job while starting out in tiling is edging me towards investing.
Does anybody know of any deals on the 2 cutters at the moment?
Cheers all.
Kev

I'm sure kev if you give Dave@tradetiler a ring he will do you a good deal if buying 2 cutters.....

his contact details...... [FONT=Arial, Helvetica, sans-serif][FONT=Verdana, Arial, Helvetica, sans-serif]01455 230 555 (UK)[/FONT][/FONT][FONT=Arial, Helvetica, sans-serif]

Sales line open Mon - Fri 9.30 am - 5.00 pm
[FONT=Arial, Helvetica, sans-serif]Fax 01455 619 537(UK)[/FONT][/FONT]

 

[kaharrison9]

Will do that tomorrow.
Thanks a lot.

 

[LJB Tiling]

Will do that tomorrow.
Thanks a lot.

Any joy m8?

I wanna buy 2 cutters aswell so be handy to know

 

[kaharrison9]

Have not ordered yet.I'm still putting a list together.Unsure wether getting the 2 together as there are lots of other things i'm wanting to buy at the same time.As tends to happens once looking your budget for things starts to rocket when you see the benefits if you spend a little more,definately getting the the tx700 though.Will let you know if i get any deal and vice versa.
Kev

 

[LJB Tiling]

Have not ordered yet.I'm still putting a list together.Unsure wether getting the 2 together as there are lots of other things i'm wanting to buy at the same time.As tends to happens once looking your budget for things starts to rocket when you see the benefits if you spend a little more,definately getting the the tx700 though.Will let you know if i get any deal and vice versa.
Kev

Go for it m8, i ordered the tx700 and tr400 and a load of other bits and bobs, Dave kindly threw in the washboy for free

Nice one Dave, Trade Tiler will be where i shop for all my future tiling needs