Schluter or ply

[Christoffy]

Hi everyone. Am planning to tile out a new bathroom for the first time. The flooring is 22mm tongue and groove chipboard. I've read up a little but wanted to ask can i use the schluter ditra matting direct to the chipboard? Or am I better to lay some sort of ply onto the chipboard then tile onto this. Any help help is much appreciated. Thanks

 

[Gazzer]

Is the floor free of deflection ? If so then I would use backerboard.

 

[kilty55]

hi christoffy, i would opt for a 6mm cement sheet as long as the sub floor is solid.

 

[Mr Tiler]

no shcluter... no ditra.... but if the floor is screwed down and strong enough than I would advise to overboard with hardi backer boards glued and screwed at 30mm centres and then tile 😉

 

[Gazzer]

no shcluter... no ditra.... but if the floor is screwed down and strong enough than I would advise to overboard with hardi backer boards glued and screwed at 30mm centres and then tile 😉

Schluter is Ditra !!

 

[Tony73]

well shluter have a lot of stuff. I like shluter trowels. 🙂 they have send me catalogues with all of they materials. It's quality stuff

 

[Mr Tiler]

i think i meant no ditra... no ply! Friday don't forget lol

 

[Gazzer]

Its Saturday you numpty!

 

[Mr Tiler]

well i did state afterwards! lol but for some reason my posts have to be verified when im posting after 1 n half thousand posts!

 

[Gazzer]

well i did state afterwards! lol but for some reason my posts have to be verified when im posting after 1 n half thousand posts!

Get a grip, its in the guest area and everyones posts need approving in that area.