Show Us YOUR Work Thread - Tilers Pictures

Edit May 2024: THIS is a New Show Us Your Work Thread for 2024 Onwards

This is the new Tilers Showcase Forum where we want new tiling work added, with each tiling job you complete having a thread of its own so people can see what kind of work you do, and potential customers can find your work

---

---

---

I thought it was about time we had a thread dedicated to all members of Tilers forums to show us any work that they do.

Be it from installing a kitchen to garden decking. Show us your work! Get those pictures taken, but then do something with them! Actually add them to a thread and some facebook groups with your website link in them etc and it'll help spread the tile love.

If you have done a job then please do share it with us.

Pics are a MUST as what is the point of sharing a job without them..:smilewinkgrin:.

So if you do a job and you take a few pics then please do share it with us.

Lets make it a big thread for all to view and input in.

Thanks Dave ..

 

[Italy]

Steam room in a new leisure centre in Walsall. Original Style glass mosaics. Using Mapei Adesilex P10 with Isolastic. Grouted with Ardex EG8 Anthracite. Made by Wedi as you can see. I didnt do the large format work

Sharon

View attachment 81575 View attachment 81576 View attachment 81579 View attachment 81580 View attachment 81581 View attachment 81583 View attachment 81584

excellent job sharon !!!! the best

 

[MTiler]

Thanks Antonio.

 

[LM]

Steam room in a new leisure centre in Walsall. Original Style glass mosaics. Using Mapei Adesilex P10 with Isolastic. Grouted with Ardex EG8 Anthracite. Made by Wedi as you can see. I didnt do the large format work

Sharon

View attachment 81575 View attachment 81576 View attachment 81579 View attachment 81580 View attachment 81581 View attachment 81583 View attachment 81584

Stunning work, as usual I may add. Well done

 

[MTiler]

cheers Lee.

 

[J Sid]

anyone having a #AndyDay on Monday and fancy pointing this mornings job I will be happy

 

[Italy]

View attachment 81819 anyone having a #AndyDay on Monday and fancy pointing this mornings job I will be happy

I already did.
One day pose.
2 days grouting. haha
seem like the same material

 

[J Sid]

I already did.
One day pose.
2 days grouting. haha
seem like the same material

old re-claimed bricks cut 20mm think. £540 for 8m2
grout in sand and cement, was hoping to do it in a morning, 2 days no, no, no

 

[Italy]

old re-claimed bricks cut 20mm think. £540 for 8m2
grout in sand and cement, was hoping to do it in a morning, 2 days no, no, no

mine were. 16/17 square meters.
grouting. with a specific grout of the same brand.
used . grouting gun. rubi

 

[J Sid]

mine were. 16/17 square meters.
grouting. with a specific grout of the same brand.
used . grouting gun. rubi

yes grout gun

 

[Flintstone]

I've had a customer tell me last week she's thinking of having those in a kitchen. Massive curved semi circle window almost to the ceiling and about 12ft wide. Having not used them before it sounds fun! Did you just grout gun the joints then smooth with a pointing tool that brick layers use ?

 

[Old Mod]

old re-claimed bricks cut 20mm think. £540 for 8m2
grout in sand and cement, was hoping to do it in a morning, 2 days no, no, no

Yours Julian?

 

[Italy]

yes grout gun

I remember. 1 day . I. and helper. to pose.
and 2 days. alone. for grouting.
more big job. operate gun. I remember. used broomstick. rounded. in the rows. then brush.
best wishes . ahaha

 

[J Sid]

yes that's the method, pointing gun into joint and clean of with a trowel, will have to leave fairly flush as slips are only 20mm at best.
had to us rapid set adhesive, customer supplied TM slow set which I could use. Had to mix thick to hold the weight and adjust as they set, would of been all night with slow set.
fixed hardie board to the wall, glued ans screw, as it was paint plaster.

 

[J Sid]

Yours Julian?

customer

 

[Italy]

yes that's the method, pointing gun into joint and clean of with a trowel, will have to leave fairly flush as slips are only 20mm at best.
had to us rapid set adhesive, customer supplied TM slow set which I could use. Had to mix thick to hold the weight and adjust as they set, would of been all night with slow set.
fixed hardie board to the wall, glued ans screw, as it was paint plaster.

I saw an error. say in PM. haha