splashback i will be doing....

[Mr Tiler]

of course it is i done it about 2 years ago pmsl... i havnt scraped at i mate so wont know until im back up there

- - - Updated - - -

its not tile paint i done it like you would skirting... undercoat and then gloss lol

 

[charlie1]

This your house? Tell u what to do for peace of mind, stick a tile to that splash back, leave it for a day then try to pull it off using rubber sucker.

 

[Mr Tiler]

nah mate its my mother inlaws she lives 60 miles away but either way i wont be getting any timber or plasterboard until ive taken the tiles off so that may be a good test to do before hand when i go up there

 

[thompsonbrown]

I will be boxing it in mate may aswell ply it in as thompsonbrown advised they will need accessing was thinkin of nocking up a frame and fixing plasterboard then tiling but I wont now will just paint it. yeh I think I will take at least half a day just setting out until I feel completely confident about each tile being a nice size lol thanks

Ash you could always build the boxing tile it then just Silicon it back to the wall so it can be removed if needed.

 

[Mr Tiler]

Ash you could always build the boxing tile it then just Silicon it back to the wall so it can be removed if needed.

is Silicon a strong bond to keep the box from moving though mate? thanks

 

[andy8758]

Lots and lots of advice here Ash - a simple truth in these situations is that you often have to remove the tiles as carefully as possible then assess what (if any) repairs need to be made before starting tiling.

If you need to box in something that has to be accessible, Silicon is a good option, but you can also utilise these magnetic catches
Magnetic Catches - 4 pack £4.92 in stock - next day UK delivery

There are a lot of options when repairing plasterboard after tile removal. if holes/damaged plasterboard is less than 25% of the tile area then you may get away with tiling straight over the damage, although you need to assess - rigidity of remaining plaster board, thickness of tile, security of the wall area as a whole.

IMHO remove the tiles in any event - folded dust sheets on worktops will prevent damage to surfaces. Assess walls, repair if necessary and re-tile.

 

[Mr Tiler]

couldn't agree more andy the advice on this thread has been perfect for what I am doing all positive although some I don't agree with thanks everyone... yeh the tiles have been up a long time so im guessing thet plasterboard is just going to come off with the tiles but you never know lol... folded dust sheets will be standard for me in every kitchen I ever do... I am quite confident I have the skills to do any repair work needed to make the walls as strong as possible. i suppose we shal wait and see but ive put a price to her for all the materials now so no going back lol cheers... oh and those magnetic catches are the way to go i think. i saw dave put some pics up a few months back with similar ones

 

[Mr Tiler]

Also how long should this sort of job take roughly guys its 5.5 m2

 

[Bradma9]

In regards to the tiles behind the wall cabinets, the cabinets should just be on sime brackets. So slide the unit up and it should pop off and then just put it back on when u have tiled it, that's what I usually do! And if there not flat there should be some blocks inside the unity with screws in which adjust the angle it sits on the wall!

 

[beanz]

Where abouts is the boiler Ash? There certainly shouldn't be a boiler flu running along a work top!?!
folded dust sheets don't always give as much protection as you think they will. I've had a couple of occasions when tiles have fallen onto shower trays which were covered with dust sheets, and got chipped. Buy a sheet of hardboard, and cut it to size. Less aggravation to work on too.
as for how long... I'd say a day for prep. Hard to say for tiling, as so many variables. Tile size/type etc. I did a splashback with small hand made clay tiles, which I expected to take a day, and it took me three! All different shapes and thicknesses. Drove me nuts!

 

[prceramics]

Also how long should this sort of job take roughly guys its 5.5 m2

2 days ?

 

[Martino]

we need more pics further away...and its very bad practice to tile on tile imo its what those guys do who leave there horses tied up outside!

 

[Mr Tiler]

2 days ?

ok il have the basis in mind that 2-3 days is sufficient although I will take my time so will compare it against the 3 days

- - - Updated - - -

we need more pics further away...and its very bad practice to tile on tile imo its what those guys do who leave there horses tied up outside!

il post some when im up there again mate but when im up there il be taking it all out anyways