Stone shower tray

[J Sid]

a long shot I know but someone may have come across this problem before.
I have a customer with a old stone shower tray which when fitted was set with a fall to one corner, sadly the one opposite the drain 🙁 and over the year water has pooled there and badly pitted the stone. So much so that it lets water thought now.
Is there any products I can apply to make it water proof/resistance again

 

[WetSaw]

Stone Sealer Waterproofing Spray | nanoShell Stone | Impregnation Protective Coatings - http://www.nanoshell.co.uk/protective-coatings/stone-sealer

How effective it would be in a shower I don't know but it worked well on a terrace I did in the UK.

 

[Old Mod]

What about colour matched akemi, speak to Apex Grange, I'm sure they'd have a product.

 

[J Sid]

thanks marc, will drop them an email.
one of them jobs I don't want to get involved in really, but a customer that doesn't expect no for an answer 🙁

 

[Lithofin BOB]

As above ,or Could you pad it out , impregnate it once fully dry- remove all loose water after each use to stop the spall

 

[J Sid]

As above ,or Could you pad it out , impregnate it once fully dry- remove all loose water after each use to stop the spall

that's the trouble, they leave the tray half full of dirty water after each use and the house keeper doesn't get in there to dry it out. I think by the amount of water getting out / though the stone and the look of it, it is shot.
i'll try marc's idea and see what the say

 

[Old Mod]

Or maybe coat it with micro-cement and resin coat it, can have matt or gloss.

 

[WetSaw]

the house keeper doesn't get in there to dry it out.

You just can't get the staff these days....

 

[J Sid]

that's what i told her as well