Tanking price

[Ian]

£20 per m2 usually gives a decent bit of profit, usually works out anywhere between £100-150 for a shower.

 

[Stef]

I need to double my price then Do you tell customers what the option is for tanking and cost it as a recommended option?

I just priced a job today & told them that the shower needs waterproofing.
I'm doing a new build starting tomorrow & ive recommended that the upstairs ensuite shower gets a tanking kit but not sure whether the builder wants to pay the extra or not.

 

[Old Mod]

Yep £150 for me too, for full shower.
£100 round a bath.

 

[Flintstone]

A tanking kit costs about £50 for paste and tape.

 

[One Day]

I don't price it separately. It's listed in the quote. Discussed beforehand that it'll be included and explained why. If they don't want it, they don't get me.
I normally use kerdi or ardex wpc if i don't get to build the walls. I will build in a days labour to prep an area (ok, it might just be 2 to 3 hours though!) and materials + 40% so anywhere from 200 pounds upwards built onto the price.

 

[Stef]

Tanked a new build shower today, amazed that the builder listened to me.
I reckon it took me 4hrs by the time I cut the tapes & put 2 coats of paste on the walls (3 sided shower 900x760)
£80 for the 4hrs work & £50 for the paste roughly so not far away at £150- £200 for the completed job.

 

[LM]

What type of paste is that Steff, was there classi seal installed?

 

[peteablard]

Think I'm going to up my price for tanking!

 

[Stef]

What type of paste is that Steff, was there classi seal installed?

I told the plumber to ditch the classi seal as I was tanking it.
Mapegum with Mapei tape.

 

[LM]

I told the plumber to ditch the classi seal as I was tanking it.
Mapegum with Mapei tape.

I like to combine the two

 

[Qwerty]

I like to combine the two

Out of interest have you called Mapei technical support to ask if this would invalidate the guarantee they offer? Would be interested to find out.

 

[widler]

I use tm tanking kit , seems good and its in with the price if they want it

 

[LM]

Out of interest have you called Mapei technical support to ask if this would invalidate the guarantee they offer? Would be interested to find out.

By using two different manufacturers I cant imagine they'd guarantee it at all, but to me it's a no brainer, how can it go wrong

 

[LM]

I prfer to use a self adhesive tape in this system as well

 

[Stef]

I like to combine the two

If it's fitted correct then it would be ok but I find the plumbers leave too much Silicon on the top edge & leaves you with a lip at the bottom of the tile.