Tile next day?

[peteablard]

I was going to say it depends on the slc you use...... I've used some when fitting vinyl where I've been laying on it less than an hour after levelling!

 

[Dougs Third Go]

glad I'm getting my diesel paid for, that's half a tonne of addy and slc in my trailer and tools in back of pick-up for 230 miles :yikes:

 

[DHTiling]

I think Doug is on about the moisture in an inch of SLC... i have seen thick SLC still sweating the next day... rock hard but still with moisture in it..

What colour limestone is it Doug.?

 

[dave l and l]

where abouts in scotia you working, its all pretty wet up here

 

[Dougs Third Go]

I think Doug is on about the moisture in an inch of SLC... i have seen thick SLC still sweating the next day... rock hard but still with moisture in it..

What colour limestone is it Doug.?

that was my concern Dave, all I know is that it's grey riven limestone.

 

[Dougs Third Go]

where abouts in scotia you working, its all pretty wet up here

Glen Lyon fella, just northside of Loch Tay

 

[stephenoneill]

have done many shop refits with slc 300 or 400 meters leave overnight and hey presto have never had a problem touch wood

- - - Updated - - -

have done many shop refits with slc 300 or 400 meters leave overnight and hey presto have never had a problem touch wood

 

[dave l and l]

nice bit of the world. trawl loch tay at the start of the season, good for decent springers, also the river dochart is not bad,
weather is looking not bad for the next couple of days

 

[Dougs Third Go]

nice bit of the world. trawl loch tay at the start of the season, good for decent springers, also the river dochart is not bad,
weather is looking not bad for the next couple of days

I go up quite a bit dave, always have to stop at Killin and take a photie of Dochart Falls for my lad,

 

[Dougs Third Go]

it only took 12 bags, start tiling this "square" ahem lobby tomorrow:smilewinkgrin: