Two loose tiles - effcient way to fix this

[On one]

ok i have stuck it down using the adhesive but im not sure i used enough . Im tempted to get some quotes for removing all the tiles, putting plyboard down and putting the tiles back on. Its a very small bathroom and i dont need new tiles. and i have about 4kg of adhesive now
If i am to get quotes then should i say that this is what i want the tiler to do ? id be more impressed by a tiler who would say that plywood needs to be put down above the chipboard first as i would assume they were more knowledgable and experienced

What makes you think you don't need new tiles? you haven't got all of the old tiles up and cleaned off yet.

 

[RayL12]

Hi all,

Still at student stage, myself so, this a searching question.

The tiles are fixed to a chipboard, which, from my roofing days, I noticed had many problems. Sagging was a major one.

Otherwise, given the amount of movement chipboard has both as a whole board or, indeed, in local areas, would you say that the very tight bond of the tiles only increases the problem of lift?

Ray.

 

[Time's Ran Out]

Ray - best start a new thread!



Op - put a mat over it and don't put it in your documents when you move.

 

[cuemanlew]

job looks wrong, chipboard is a no no, for a quick fix use a flexible Silicon, regrout hope for the best. If other tiles come loose then its a floor up job and hopefully done right next time.

 

[RayL12]

Ray - best start a new thread!

Sorry for the confusion, John and, the late response.

First, my comment was to answer the problem with chipboard in my experience while a roofer.

The phrase' searching question' was way off mark. What I meant by that is, I'm not a experienced tiler and that, tilers may have a different opinion on chipboard, that, I may learn something regarding tiling and chipboard.

Hope I make myself clearer.

Ray.