What Size Metal Trim For 9mm Tiles?

[gooty]

im fitting 300x600 tiles that are 9mm thick.

i read on here that i should use a 10mm round trowel for that size tile and that it will squash down to 6mm.

I assumed that would mean id need 15mm trim but someone at topps tiles said otherwise.

can anyone advise what i need to do/buy?

thanks

 

[White Room]

For 9mm tiles, depending on the condition of your walls, a 8mm trowel with the tiles being back skimmed.

Trims tend to be a couple mil bigger than the thickness of the tile.

 

[Tile seller]

12mm should do you.

 

[Bill]

10mm tile trim.

 

[Andy Allen]

Rectified tiles 12 mm
Non rectified 10mm
And I prefer square edge trim..🙂

 

[hmtiling]

As above but I'd use box trim

 

[mma]

Depends, sometimes the middle of the tile can be slightly thicker than the edge. Take an off cut to your local friendly tile shop.

 

[J Sid]

Square edge trim, same thickness as tile, so 9mm, 10mm max

 

[Time's Ran Out]

The thickness of the adhesive bed is irrelevant it's the tile thickness that's covered so 10mm is my choice.

 

[Ian]

10mm trim for me too.