would like some advice on a current project.

[jonnyc]

trying to upload a video so can see better maybe how i need to get a false joint between fixed stone and moving tray that looks same as jointing material i will use.client does not want a gap between main field stone and tray stone when in elevated position.

 

[jonnyc]

video not come up. will try again.

 

[jonnyc]

been trying to upload a video for 30 mins now but not having any luck,how do i do this ?

 

[Tony73]

i think you have to put it on youtube and then it's easy, maby i'm wrong

 

[jonnyc]

i have given up . can only show a picture of stone set in tray and hopefully fully this looks like part of floor
with no hint of what lurks below surface!

 

[Dougs Third Go]

as Tony says johnny, upload it onto youtube then embed it in a post. As for reducing your flag thickness, is there a monumental stonemason near you, as they'll be able to machine it to thickness.

 

[Colour Republic]

not read all the replies but can you not trench cut the back of the stone on a wet cutter then knock out with a chisel?