Electrical Advice

is regular Cat5e cable usable outside? Discussion Threadis regular Cat5e cable usable outside? Electrical Advice

notice i didnt say "suitable outside"


rather than me buying a drum of external cat6, running it between house and shed, with an outlet socket at each end and a couple of short patch leads for the modem and computer end..... can i just use cat5e with rj45 terminations directly, but cover it with something.. or thread it through pipe on the higher risk areas of the route...

 

Who uses 3d printers & 3d scanners. Discussion ThreadWho uses 3d printers & 3d scanners. Electrical Advice

Just curious about who uses 3d printers and 3d scanners, for hobby or work.
We have three 3d printers at work and one 3d scanner.
Also, what software do you use for drawing any 3d objects. I use SketchUp & Siemens NX

Who uses 3d printers & 3d scanners. for the original thread on Electricians Forums

 

Coatings for industrial electrical cabinets? Discussion ThreadCoatings for industrial electrical cabinets? Electrical Advice

Which dielectric matte coatings are applied to industrial electrical cabinets?

Coatings for industrial electrical cabinets? for the original thread on Electricians Forums

 

Coatings for industrial electrical cabinets? Discussion ThreadCoatings for industrial electrical cabinets? Electrical Advice

Which dielectric matte coatings are applied to industrial electrical cabinets?

Coatings for industrial electrical cabinets? for the original thread on Electricians Forums

 

ANNOUNCEMENT: New Moderator Assigned: Megawatt (Please congratulate!) Discussion ThreadANNOUNCEMENT: New Moderator Assigned: Megawatt (Please congratulate!) Electrical Advice

ANNOUNCEMENT: New Moderator Assigned: @Megawatt (Please congratulate!)

@Megawatt has been a forum member for a while now, he's an American chap and has been providing advice to electricians on the forum for a while, he's nice, and I thought it's time we added a new moderator. And ideally we need one...

 

Littlespark Thread A Day (1) “tis the season” Discussion ThreadLittlespark Thread A Day (1) “tis the season” Electrical Advice

Ok… not quite “… to be jolly” but it’s that time of year that many wholesalers run an annual Trade Day. Usually some games, a raffle and some discounts…. And maybe free breakfast.

CEF last week. (Hotdogs, if you’re wondering) Didn’t get much except for a new set of WERA drivers.
I tend to replace mine on a yearly basis… through loss or damage… but this set...

 

CompEx 01-04 (Failed Ex04) Discussion ThreadCompEx 01-04 (Failed Ex04) Electrical Advice

I sat the CompEx 01-04 course for the first time back in July. The results came in the post on Saturday and I have failed 1 of the 5 units -

Ex04: Inspection and maintenance of Ex i systems

Quite relieved if I'm honest as the installs are quite intense!

Does anyone have any tips for the inspection of Ex i systems? If I can remember they are looking for visual, close and then detailed...

 

LED T8 lights Discussion ThreadLED T8 lights Electrical Advice

Having done the numbers I modified my 5 x 4ft double batens in the workshop to take LED tubes T8 22W. After less than a couple of years, 50% have failed. They flash annoyingly just like the old tubes and then give up altogether. Has anyone else had the same experience. One theory is they don't dissipate heat fast enough?

LED T8 lights for the original thread on Electricians Forums

 

Gold card recognised ?? Discussion ThreadGold card recognised ?? Electrical Advice

Hi lads does anyone know if the gold card is recognised in the Republic of Ireland aka south of Ireland

Gold card recognised ?? for the original thread on Electricians Forums

 

Martindale ET4000 Discussion ThreadMartindale ET4000 Electrical Advice

I’ve just found a brand new, or hardly used Martindale ET4000 for around £200. Has anyone any experience with this multimeter? I’m a fan of their voltage indicator and proving unit.

Martindale ET4000 for the original thread on Electricians Forums

 

Megger MFT-X1, definitely a step backwards. Discussion ThreadMegger MFT-X1, definitely a step backwards. Electrical Advice

Hi guys & gals,

I gave in and bought the new Megger MFT-X1. Got my hands on it Friday night, had a little play with it, used it at work on Monday and wrapped it back up on Monday evening, ready to send back...

I've been using my megger 1720 for about 7 or 8 years for domestic and commercial testing and lots of fault finding and I wanted to start testing EV...

 

Kewtech KEW-80L Thermal Printer garbage Discussion ThreadKewtech KEW-80L Thermal Printer garbage Electrical Advice

Hi

Anyone using the KEW-80L thermal printer? I've only hit the second roll it came with and now it's spooling 2 labels out and often missing the label itself and printing over two. I've reset it, check settings are right, left battery out overnight etc, nothing seems to work.
Ironically it's come at my busiest time.
For what they cost new these things are a rip off...

 

Hmo or standard rental Discussion ThreadHmo or standard rental Electrical Advice

Hi All,

Question for you/ your oppinion.

I have a customer that owns a 3 bed hmo and has asked me to install and sign of a new consumer unit for him.

Thing is he has said he doesn't want afdd’s installed due to cost and claims he will no longer rent it as an hmo. I don’t believe him.

So how do I cover my arse on this one? Do I specifically state “Rental non HMO consumer unit” on the EIC?

Open to...

 

Fixings for Aluminium channel in display fridge? Discussion ThreadFixings for Aluminium channel in display fridge? Electrical Advice

Hello, I hope you are well, I need to add a light in a display fridge in a shop at the top, the are aluminium U Chanel’s at the top which are designed for attaching things similar to unistrut but much smaller but I’m unsure of the fixings I need, can’t use self tappers as is glass all on the other side ( please see picture not the best as it’s what...

 

How to wire a C/B into a dual battery set up Discussion ThreadHow to wire a C/B into a dual battery set up Electrical Advice

QUESTION: How to wire the C/B into this current dual battery set up.

EXISTING SITUATION: MAIN Battery is OEM and feeds OEM circuits. Added an AUX Battery in the OEM dual battery location. Connected the AUX - terminal to the MAIN - terminal. Connected the 100A Accessory Fuse Block power cable to the AUX + terminal. Installed a smart isolator between AUX and...

 

Multipack Madness! Save on Downlights This Weekend Only! Discussion ThreadMultipack Madness! Save on Downlights This Weekend Only! Electrical Advice...

 

Pirate's Rant #2 Discussion ThreadPirate's Rant #2 Electrical Advice

People who claim to be plumbers...
and tilers...

New bath fitted and the drain is accessible from the side and there are isolating valves on the hot and cold supplies, about halfway along the bath, underneath it. So far so good. Tiler arrives to tile the walls and floor and without asking he proceeds to tile the side of the bath frame when a plastic panel was intended. Result is that the drain and isolators are no...

 

Automotive Relays in series Discussion ThreadAutomotive Relays in series Electrical Advice

I have a specific scenario where my new spot light/flood light pods have three wires feeding them. (Black-Ground, Red-white LED, Yellow-Amber LED) as you can imagine I’d like to have a simple operation to use on or the other but only if the fog light switch is active essentially giving the go ahead to the pods to them be selected for the desired output color.
Here’s what I’m thinking and...

 

Outdoor Electrical Cover for Pool Pump Area. Discussion ThreadOutdoor Electrical Cover for Pool Pump Area. Electrical Advice

Hi, I need to replace this outdoor electrical cover and have no idea where to find it. Thanks



Outdoor Electrical Cover for Pool Pump Area. for the original thread on Electricians Forums

 

Shower pump wired off shower Discussion ThreadShower pump wired off shower Electrical Advice

Work for a company who sub contracts to the local council and looking for some advice.
In the domestic properties the council have wired a shower pump off the load side of the showers in 2.5mm (40A RCBO) which then serves a 13A switched fused spur to feed the shower pump. I am unsure this is ok as a shower is a fixed load and worried about overload on the 2.5mm?
the council say it’s covered...