Plumbing Advice

Missing pot from trapped gulley (Brand identification request) Discussion Thread

Hi Guys,

I have a customer who has had building work done and the pot (if that's what it's called) has gone missing. I believe the builders blocked the drain with debris, removed the insert/pot/grill and the clowns didn't put it straight back and it got dumped with all the other waste on site. I told the customer if I can identify the make/type of trap, I could possibly buy a new unit and take the...

 

Rigid syphon Discussion Thread

Hi just to confirm does this look like a rigid syphon. Not seen in person but doesn't look like it one of the ones that splits so can replace the diaghram. Thanks

Rigid syphon for the original thread on Plumbers Forums

 

Any tips for a non plumber with no pilot light Discussion Thread

Hi,

Ideal classic boiler has no pilot light.

Home emergency cover is an option, so no huge drama but I wondered if there's anything a non plumber could try.

Tried:

Pushing the button to ignite the pilot light,

Turning off and on the boiler fuse in my Junction box and tried the pilot ignition again,

Turning the thermostat on the boiler to zero and tried the pilot ignition again

Thanks in advance

Any tips for a...

 

Hive thermostat multizone help Discussion Thread

Can anyone help me. I have just moved house and we have a boiler with a separate hot water tank and then 2 thermostats, one upstair and one down stairs. We want ti fit Hive and I know we need one thermostat and hub to work with a boiler and separate tank however I cannot seem to find the multizone one for sale that we also need. Do I just need to buy a separate combi boiler one? have they stopped selling multizone?.

Hive thermostat...

 

F&e tank vent pipe pouring hot water Discussion Thread

Hi all

I have an oil fired heating system open vent with an f&e tank we had some problems with air constantly getting into the radiators and one of them doesn’t work at all, the system is quite dirty and have now noticed everytime we use the boiler the vent on the f&e tank is pouring hot water but only when the boiler runs. Is this a sludge problem or trapped air as the tank is really dirty.

F&e tank vent pipe pouring hot...

 

No water in shower head, pressure/flow problem Discussion Thread

Dear Professionals, could you please advise. I have standard mixer tap in my bath (its about 15 years old, i recently bought the house). The water comes out from tap itself in massive amounts, bath can be filled in 3min, same if i unscrew shower hose - the water will shoot up very high, however as soon as hose is connected back there is hardy any water coming from the shower head. I tried a 2 new hose and 2 different...

 

Please advise - no water from shower head Discussion Thread

Dear Professionals, could you please advise. I have standard mixer tap in my bath (its about 15 years old, i recently bought the house). The water comes out from tap itself in massive amounts, bath can be filled in 3min, same if i unscrew shower hose - the water will shoot up very high, however as soon as hose is connected back there is hardy any water coming from the shower head. I tried a 2 new hose and 2 different size...

 

Main 24HE constantly cutting out and firing back up on HW and Heating and intermittent flame failure light. Discussion Thread

I am having a problem with my main 24he boiler where the flame is constantly clicking on and off with the heating and when using hot water. Some times the flame failure light comes on but it ignites again after a few seconds. The plumber has changed a couple of sensors on the boiler and checked the filters are not blocked but it is still doing the same thing...

 

Mulitquick concealed cistern Discussion Thread

Any one know if you can still get syphons for these concealed cisterns

Mulitquick concealed cistern for the original thread on Plumbers Forums

 

Grohe Toilet Cistern Abrupt Shutoff Discussion Thread

I have purchased 2 x GROHE Flushing Cistern Solo 0.82 M 38691000

I am pleased with them for the most part and they replace existing Grohe cisterns that were in place for 14 years prior. However, these new ones appear to shut off the water supply very quickly after filling. Whilst the rapid shutoff does not cause our pipes to bang, I wonder if the abrupt shut off may cause issues further down the line. Is there a way to...

 

Inline potable expansion valves Discussion Thread

Has anyone fit inline expansion valve on the cold water supply to an unvented cylinder. The normal style were you just tee of after the composite valve can leave a dead leg in the pipework? A local water authority has pulled some. Thanks

Inline potable expansion valves for the original thread on Plumbers Forums

 

Hello , need advice about rusty faucet Discussion Thread

I am newbie here , so it was a rusting spot i scrub with sponge and cif now i scrubed down Chrome it is bad? Do i need replacement or it will cause leak ?

Hello , need advice about rusty faucet for the original thread on Plumbers Forums

 

Tiling Cost Discussion Thread

Just had wet room done on disabled grant, wall 13" above door and 11" at side of door to do, got tiles and a bucket of adhesive, also a wall nearly 4 sq/mtr to do in different tiles, not got tiles yet, walls newly plastered and painted, just a new small radiator to remove to tile behind. Need a guide to cost of labour and grout to do job, in Brigg Lincolnshire area.

Tiling Cost for the original thread on Plumbers Forums

 

Plastic hot water connection. Which compound to use?? Discussion Thread

Hi, I have a leak on the hot water inlet of my concealed Aqualisa Gainsborough shower.
I have stripped it back and with the hot water feed on I can see the drip appear at the bottom of the plastic screw fitting.

I want to ensure that when I re-tile it, I won't have the same problem in the future and was wondering what to use around the plastic thread to make a well sealed connection, (PTFE, boss white, etc etc)...

 

Mixer tap ring sheared during seal replacement - how remove Discussion Thread

In serious trouble here, was going to replace seals around base of mixer tap spout as it was stiff to rotate. Allen removed ok, but spout very difficult to remove, but working it back and forth got it out. But a part has sheared and is stuck in tap base. How on earth I am going to get this piece out. Boy am I in the dwang!

Mixer tap ring...

 

Fire valve external oil boiler Discussion Thread

We have an external grant vortex pro and the fire valve is on the oil supply line 1.4m away from the boiler . Read somewhere should be a distance of minimum 1 metre away .

The sensor end is clipped into clip above the burner correctly . Just wondered if the fire valve should be closer or if that’s ok at 1.4m

Thanks .

Fire valve external oil boiler for the original thread on Plumbers Forums

 

Replacing Radiators with Heated Skirting Discussion Thread

I am getting prices to replace my existing radiators with heated skirting.

Any advice

Replacing Radiators with Heated Skirting for the original thread on Plumbers Forums

 

10 years on the forum Discussion Thread

Just realized that I have been on this forum for 10 years and 1 day.

Joined up when had some real horrid things going on... death of my dad + health issues + bad financial issues.
Personally didn't think at the time I would be around now.

I would hate to read some of the posts I've posted over the years.....

Seen many come and go and forum dropping off to almost nothing many a time.

Not as active as I was when I needed to vent.....but still...

 

DHW supply from Vaillant turbomax 828e Discussion Thread

Hi,

We have a combi boiler supplying dhw and c/h to our 4 bed, 2 bath house. The boiler is in a cupboard on the first floor bathroom and supplies shower, bath and sink.
There is an attic bathroom with bath and sink, and a kitchen sink on the ground floor. Recently the dhw does not fire up if kitchen tap or attic hot taps are turned on. If we
leave one of these taps on and turn on a hot supply in the main bathroom then hot...

 

Asked to notify DNO of heat pump installation Discussion Thread

Recently had job where could not get Electrical Installation Certificate completed because we had not got approval from DNO for the installation of 4 7kwDaikin air con units. seems they sometimes are not classified as heat pumps, but trying to get clarity. What have you found>

Asked to notify DNO of heat pump installation for the original thread on Plumbers Forums