ive got a bathroom to do this week, its chipboard flooring and as the
house is only about 6 yrs old i thought i would lift
a bit of floor to make sure it was not a floating floor,
its not a floating floor but the chipboard has about 40mm
of insulation between it and the joists, should i just...
Hey up folks,
If any of you are a bit thin on the loft insulation, now is the time to get some at this price.
You only allowed 18 rolls per purchase. I took the cattle trailer down to fill it but only got the 18...
hi all,could anybody help me out with this one?i have quoted on a 10 m2 sun lounge and the customer don't want to pay out for underfloor heating.will laying insulation boards on top of the concrete base which will be levelled with screed take away a bit of that coldness.thanks in advance for any...
Hi All,
Im new to the forum and underfloor heating in need of a little of advice....
Im in the process of renovating my kitchen (which is a galley) and looking into underfloor heating on the middle run (5mx 1.2m). I have removed previous tiles and in process of taking up previous adhesive...
stewie
Thread
board
concrete
floor
height
insulation
subfloor
usa
Hello to all.
Where we have a good flat and sound suspended wood plank floor in the bathroom we are advised by carpet/lino/tile shops that UFH insulation boards are not required if the mode of use is intermittent, ie, once per evening.
Laminate planks will be the top surface flooring lying on...
Hi,can anyone recommend a Wetroom tiling course as I would like to learn how to floor screed to create falls,install format trays in timber floors,Thanks
Hi all,
We're half way through preparing to tile a 20sq meter floor, but has been put on hold due to a forced change in tile.
So far, we've 6mm EkoBoard (which I bought through this site) covered with electric underfloor heating mats.
We're having a 600 x 600 porcelain tile, so need to SLC...
Hello all - Going to have a kitchen tiled onto concrete surface and have UFH. Seen this stuff Ekoboard. Underfloor Heating | Floor Insulation | Uheat
It's less than half the price of Marmox. The difference is that there is no rigid layer either side, and according to the manufacturers the...
I am having an on-going argument with a local supplier who insists that No More Ply backer boards are as good as Ekoboard type boards for insulation.
I have asked for them to provide figures for heat loss etc but they cant.
While I dont doubt that the No More Ply boards offer some insulation I...
I will be starting a latrge job soon and the customer has asked about sound insulation.
basically I intend to overlay the floor with 18 mm ply prior to tiling. As I will be using 18mm ply is it feasible to sandwich some form of sound insulation between the original floor and the overlayed...
Hi,
Can anybody help just tried testing 2 brand new coils of elektra underfloor heating cable and got a dead short reading of 0.0 mega ohms between live conductors and a reading of greater than 1000 between live conductors and earth on both cables has anybody had a similar issue or can anybody...
dannyhull
Thread
floor
heating
insulation
problem
ufh
underfloor
underfloor heating
usa
Hi
Has any one used XPS Thermal board (from the Underfloor heating store) ?
They are considerably cheaper than kerdi boards / wedi boards etc
I know you get what you pay for but these boards have very similar properties IE. thermal performance, resistance, strength etc
Area I am...
Hello all,
I'm about to buy the boards I need for the kitchen and bathroom tiling, but I'm not 100% which ones to opt for, any advice would be very gratefully received!
Firstly the bathroom. The wall tiles we're using are marble and too heavy to go directly onto the existing plaster skim...
I have a kitchen floor to tile for a builder who is using the electric underfloor heating and was wondering if he needs to use insulation boards .the floor is 50mm sand and cement screed layed over 80mm kingspan
Hi,
I’m about to order and lay my first UFH system on a cement screen – laid 5 months ago. I’m tempted to use cement faced tile backer boards as although more expensive I have a feeling that I will be able to walk on them while laying the mat, pouring SLC, tiling etc without worrying about...
Hi Peeps
Im quoting on a job and the customer is thinking of having electric UFH. The floor is floor boards so am I better off plying the floor or using insulation boards (and what thickness)? Ive read conflicting views on this and my head hurts!
I plan to put slc on top of the UFH mat.
The...
Hi folks, have a bathroom floor with UFH to tile, substrate is well screwed down chipboard. I know normally you bed the ins' boards down onto flexi adi, I'm thinking it would be ok to glue (gripfill) and screw them down with washers in this instance.
What do you think? Otherwise I could...
Just a quick question, what are your thoughts on the pro's and cons of insulation boards? Are they really needed or not?
eg: 10yr old concrete floor..... board or not to board?
I know what the literature says, just curious on the pro's thoughts :lol:
Hi - I am a rookie tiling my conseravtory/kitchen starting tomorrow!
Am: 1) priming concrete
2) Laying insulation boards (cheap blue ones) with flexi addi
3) UFH instalation
4) SLC
5) Slate 40x40
6) Seal
7) Grout
8) Seal
When I am laying the boards I...