level

  1. G

    Self level tips

    I’m going to be self leveling my concrete floor I’ve removed tiles today but cannot get the adhesive off it’s solid even with a sds chisel so I’m going to self leveling it I’ve noticed with a laser the floor is 15mm out from one side of the room to the other has anyone got any tips for when...
  2. G

    Self level tips

    I’m going to be self leveling my concrete floor I’ve removed tiles today but cannot get the adhesive off it’s solid even with a sds chisel so I’m going to self leveling it I’ve noticed with a laser the floor is 15mm out from one side of the room to the other has anyone got any tips for when...
  3. R

    Self level or not?

    Hi everyone. I'm doing a bathroom floor over existing floorboards. I'm also adding a 1.5 sq m electric heating mat before tiling with 30 x 30 granite tiles. I'm applying thermal board which I'm sticking with adhesive. Been told don't need screws or tape as adhesive will do. My dilemma is whether...
  4. C

    Self levelling over UFH mats - how to get it flat?

    Hi, I'm tiling my 12m^2 conservatory - Concrete base, Self levelled, 20mm Jackoboards, Prowarm mat, self levelling compound, then 600mm square porcelain tiles. So far I have self levelled the base, and stuck the jackoboards down - all really nice and flat so far. Now I need to fit the UFH mat...
    • cirlam
    • Thread
    • canada how level levelling over self self levelling ufh
    • Replies: 4
    • Forum: Canada Tile Advice
  5. H

    Ardex am 100 on kerdiboard that is not level?

    I messed up and failed to level bathroom wall properly in prep for tiling. I have installed kerdiboard 5mm but still a problem as wall is slightly bowed with some areas having a maximum10mm dip were wall meets adjacent walls at either end. Can I fill in and level with ardex am 100 on top of the...
  6. S

    Build up level under hardiebacker with adhesive?

    Hello, I'm soon to be tiling my bathroom floor. It was tiled by a previous owner directly on to T&G floorboards, and miraculously no tiles ever cracked. The floor is quite stable and surprisingly level; I've replaced some damaged floorboards and removed the previous flexible adhesive, and...
  7. J

    warm up mat how deep can i level over it

    how deep can i self level over electric heating mat i need to bring the floor up 15mm
  8. E

    Electrical: Level 2 electrical advice nsw australia

    Level 2 electrical advice nsw australia Hi, recently completed my cert lll gap training. From the uk and been in Australia for two years. I am just asking for any advice as I would like to get some further Experience and knowledge of qualifications I will need or the best advice in gaining...
  9. P

    50/50 Floorboards Concrete room. Not level!

    Hi, So I’ve decided to tile my mums kitchen for her. Never tiled before so please bare with me. I’ve done my research and was feeling quite confident that I could get the job done. Firstly I removed all of the fake (tiled look) wooden floor. Underneath, I’ve found a few issues that I’m going to...
  10. C

    Wooden floorboards - what is best way to level it?

    Hi all, So there’s a floor that needs tiling on the third floor of a house, they have taken up old floor and brought it back to the original 18mm floorboards. These floorboards are very uneven, even after they have screwed them all down. They want to lay porcelain floor tiles down. Is this...
  11. C

    Best way to get tile level with adjacent floor

    I wanted to have a wood floor in my living area and a tiled hallway. The whole ground floor was self levelled so nice flat even floor. The wood floor has gone down, its total height is 19mm (15mm floor, 4mm underlay). My tile is 450x450mm and 10.5mm thick, how can I make up this 8.5mm...
  12. A

    Setting Out Raising level of tiles to meet drain grate

    Hello, it’s my first time fitting a wet room and I’m having trouble with the drain grate vs the height of the tiles and addy. I’m using a preformed GRP tray which came with a purus minimax waste and a tile-on grate. The height of grate when fitted on the (now tanked) tray is 14mm but the...
  13. M

    Water not flowing to shower drain / Incorrect Fall Levels?

    Hi, We have just done some bathroom modifications privately to level out a shower floor for an elderly disabled bathroom. We just did the shower area and not the whole bathroom (so only the pink tiles are new). The water is flowing outside of the shower, suggesting the fall levels are not...
    • mdr07
    • Thread
    • drain fall former level levels not shower shower tray water wetroom
    • Replies: 0
    • Forum: Tanking and Wetrooms
  14. L

    Leveling uneven backer board

    Hello experts! The walls of my bathroom were extremely uneven and out of plumb, I've now lined them with wedi style foam backer board (abacus elements board). It has worked well for 90% of the room, walls are now mostly flat and level. Though, there are a few areas where I have still ended up...
  15. Fitwidge

    Looking for a new lazer level

    Any recommendations on lazer levels? i only ever do bathrooms, mainly just wall tiles, now and again floor tiles. was looking at dewalt dw089k if anyone had experience with it? Thanks in advance
  16. Joshjupp

    Imex laser level

    Anyone know where I can get my laser level calibrated I think it’s a little bit out also once I take it off the locked position to self level it gets stuck only had it 6 months I’ve got the lx3dg
  17. D

    Advice please. What board to use to level wall and tile on?

    I have porcelain tiles 600mm x 150mm x 9mm that I need to fit on a wall 135mm x 240mm but the plastered wall is way out. I need a board to fix to level the wall and take the weight of tiles and adhesive. Wanted to know what board is best for doing this, what's the best way to fix to a plastered...
    • Deleted member 53336
    • Thread
    • advice board canada level please tile wall what
    • Replies: 2
    • Forum: Canada Tile Advice
  18. Mapei UK Marketing

    NEW PRODUCT: Mapei Rapid Level CT 3220

    Rapid Level CT 3220 is a rapid setting smoothing/levelling compound for levelling differences in thickness from 3-20mm in one application. Recieves tiles in only 45 minutes. For further information email [email protected] or click here.
  19. D

    Advice required please, Multi floor level and underfloor heating...

    Hi, i am new to this forum but after some advice if possible please. I am building a new extension and as part of the work i am knocking through between the new extension and an existing room. Ideally i would like Underfloor heating throughout. My plan for the new extension was pipe connected...
  20. U

    Tiling Solutions | Kent Tilers - NVQ Level 3 Tiler (Very Rare!)

    Protiler 68 submitted a new resource: Tiling solutions - Experienced,quaified tiler Read more about this resource...

Featured Threads

Advertisement

Back
Top

Click Here to Register for Free / Remove Ad