HI guys
ive just finished tiling my bathroom and im in process of putting sink and toilet back! Ive put pedestal back under sink and tighten screws that hold it in place but its still wobbly and unsafe!! Do i need an adhesive to slap behing the back of the basin and if so what adhesive is...
lets just say I know some guy who is tiling his own bathroom...
and deep down he must of known that tiling on painted plaster wasn't a good idea coz he scored the paint before he slapped primer on.....
but then after doing a few meters he went and checked and of course - no - get rid of...
Hello,
I have some 5cm x 5cm ceramic tiles to be fitted to a bathroom wall. I have removed a few of them from the mesh backing because of slight damage, & also the spacing is out on a few of them (no time to order replacements!). Out of about 65 30 x 30cm sheets to fit, there is maybe 1 tile...
suz
Thread
back
fitting
loose
mosaic
mosaic tiling
mosaics
should
tile
tiles
usa
I've got to look at a job where tiles in 2 bathrooms have worked loose. The client said that a bad job had been done previously. There is UFH. That's all I know so far. Can anyone give me some ponters as to what to look out for ?
I am wondering whether the job might have to be redone from...
Hi everyone, hoping you can shed some light on something that's happened.......
Tiling a bathroom at the moment, all walls are plasterboard but I've done the shower area out using aquaboards which were cemented to the breeze blocks and drilled and plugged.
Primed the walls with bal primer (2...
I am going to fit Warmup UFH (loose wire) on top of warmup insulation board, with travetine floor tiles on top.
I was wondering if it the "done thing" to use a self level compound on top of the cable before tiling on top?
I had a go at putting up some tiles in my bathroom (first tiling attempt!) and have done about half of the room but am unsure whether to continue as some of the tiles are a little loose if I press them, especially around the edges and corners. A couple have fallen off when I applied a bit of...
Four months ago I tiled my kitchen floor with large floor tiles some of which now sound a bit hollow and others are starting to move a bit.
Background: Firstly I screeded the concrete kitchen floor to level it after removing old tiles. When the screed had dried it was sealed with PVA. The...
Hi Guys
Problem with some tiles i have put up a few days ago, 3 of the tiles are loose. I took them of and the tiles looked like they had just come out of the box, the addi was fine on the wall (solid). Anybody any idea what the problem is ?:mad2:
I recently went to see a lady about cleaning and stabilsing her victorian tiles, the tiles are all in good condition but are very slightly loose in the main wear areas and you can feel and hear them shaking when you walk over them.
What I wanted to know is, how do you stabilise them, do you...
Hi all,
I posted here a few months ago while I was getting estimates to have a large floor area tiled.
A large amount of the floor was wood parquet floor. The job seemed to go well and all was well BUT recently some of the tiles came loose (grout started to crack) and then some clearly are no...