Hi all,
I am currently renovating my bathroom and will be tiling with 450x300x13 marble tiles.
For the floor, so far I have:
Sistered joists to level them out, added noggins every 300mm
18mm ply (with latex primer on sides and rear) screwed at 200mm centres
6mm marmox laid onto Keraquick...
Good evening.
Has anyone got any experiences with this new tilebacker board from Marmox? It incorporates a rubber foam layer to assist with conformity with Part E building regs (impact sound).
I'm about to plan a bathroom project in a 7yr old 1st floor flat, which was tiled on top of a...
Hello
As a continuation from a previous thread, Im thinking of laying marmox boards onto concrete sub floor. The concrete is quite rough and as the house is 1910ish.
Would this concrete need to be sbr cement slurry before laying the addy for the boards? Would the addy be enough to secure a...
John the tile
Thread
backerboard
boards
concrete
marmoxmarmoxbackerboard
slab
tile backerboard
usa
Hello. Ive a quick query about my wetroom, Ive done lots of searching on this site but need a definate answer for my particular situation.
Im going to Marmox/Wedi the back and side shower walls, they'll be tanked and waterproofed with a BAl WP1 onto a Tuff-form tray. For the rest of the...
Hi,I'm installing a showerlay tray in a wet room I'm doing I was going to lay ply in-between joints to support tray put tray in and cover rest if floor with 18 mm ply with 6 mm tile backer board on top of that,But looking at the install instructions online they have 18mm ply on joint with tray...
For anyone looking to install a wet room in their home, wet room waterproofing is a vital part of the project.
Wet rooms have become a popular choice for bathrooms - they are a striking and spacious option for any size room and the sense of openness that they provide ensures that occupants feel...
I have had a search on this and other forums but can't find the answer hence the post.
I have fixed 20mm marmox boards to wall with dot and dab tile adhesive then tiled over with 8mm ceramic tiles.
I need to mount the heated towel rail but not sure if I need to drill through the tiles, marmox...
Nigel Garland
Thread
20mm
backerboard
board
ceramic
ceramic tile
fixing
help
marmoxmarmoxbackerboard
please
tile backerboard
usa
wall
Hi guys
ill be very soon Laying Marmox floor boards on plywood.....
what size / type trowel would you recommend? and I assume a std powdered mapei flexible adhesive (keraflex) will do the job!?
thanks
Dave
Guys, im going to board out the bathroom with marmox
I was going to use 12.5mm.. but would 10mm be ok to use?
will be tiled on obviously.. not huge tiles.. say 600x400 ?
thanks
Dave
davemul
Thread
backerboardmarmoxmarmoxbackerboard
tile backerboard
usa
wall
Hi,
I've already put aquapanel onto a frame at the rear end of the bath to create a ledge/step. My question is that I need to build the height on the horizontal part by about 10mm. As i've already got some marmox lying around can I simply glue/screw this onto the aquapanel then tile??
cog32
Thread
aquapanel
backerboardmarmoxmarmoxbackerboard
tile backerboard
top
usa
Hi all, just installed a marmox showerlay for customer & now tanked & ready to tile, however customer has now changed her mind on floor tiles on tray from 100mm travertine to 10mm glass mosaics. this wouldn't normally be a problem except that i know small mosaics can indent into this type of...
alex1966
Thread
backerboard
glass
marmoxmarmoxbackerboard
mosaic
mosaic tiling
mosaics
small
tile backerboard
usa
starting a job on thursday, and want to over board plasterboard with marmox. will use keraflex to adhere it, then screws and washers to screw through to the stud, probably every 150-200 mm. the question i wanted to ask, is should i use 6mm or 10mm board. im pretty sure the studs are at 400mm...
johnryan
Thread
backerboardmarmoxmarmoxbackerboard
over
tile backerboard
usa
HI First post on this forum. Experienced DIYer but first wetroom.
5mx2m 1st floor, wooden joist, 25mm ext. ply. 20mm Marmox with showerlay. elec UFH.
Plan is to lay the showerlay on a bed of c2fs1 tile adhesive (larson) to stand proud of the rest of the floor, so I can lay the UFH and SLC...
mellie_man
Thread
backerboardmarmoxmarmoxbackerboard
slc
tile backerboard
usa
Marmox board info,
again theres a web site and tech helpline :thumbsup:
hope it helps,
ed
MARMOX
Call Technical Services on 01634 862 277 W www.marmox.co.uk
Marmox are a British company with over 40 years experience in manufacturing construction products...
Aston
Thread
backerboardmarmoxmarmoxbackerboard
tile backerboard
usa
Hi All,
Just wanted to say hi and thanks in advance, recently joined this forum. I`m gathering info for a wetroom install. Been researching this site which is easily the most comphrehensive source for wet rooms on the net. So here`s my plan to install my wet room or wet area in my bathroom...
bob320
Thread
backerboard
install
marmoxmarmoxbackerboard
required
tank
tanking
tile backerboard
usa
waterproofing
wetroom
Hi
I
am looking for some advice on what board to put onto a wall I am going to tile.
The wall is plastered with vinyl silk paint on it, I am turning the room into a wet room and the total area to be tiled is about 8sq M.
Tiles to be hung are 300mmx600mm Porcelain tiles
I wish to board the...
onceceltic
Thread
backerboardmarmoxmarmoxbackerboard
tile backerboard
usa
Hi All,
New to the forum and after reading some of the threads on here i'm now a little worried.
I'm in the process of converting the attic to a nice onsuite with a walk in wetroom shower, unfortunately I have already put a showerlay tray in and this is now fixed in place with its drain etc...
DarkyUK
Thread
backerboardmarmoxmarmoxbackerboard
tile backerboard
usa
Hi,
Just wondering how i should raise the plywood level so it is flush with the edge of the showertray?
Should i use 4mm ply and screw it down?
Should i glue the ply down, if so what glue should i use?
Should i use some kind of poured / self levelling compound?
Thanks,
James.
jimmycooker
Thread
backerboardmarmoxmarmoxbackerboard
ply
tile backerboard
tray
usa
wbp