marmox

  1. AliGage

    Marmox board

    Can anyone direct me to somewhere that will tell me the load bearing of marmox boards? Looked in the marmox doenloads website and can't see any indication.
  2. G

    Marmox V Hardiebacker or Brick Wall

    Hello all, I'm undecided about Tiling on Brick wall. The fitter has agreed to remove remaining layer of mortar back to the Brick Wall. I am in no doubt there will be areas on the Brick Wall that will bear some minor damage. The issue is, do I get the damaged parts filled in before tiling...
  3. D

    Marmox boards - screws

    Hi everyone, new here (I will introduce myself, but really need an answer so I can order the stuff I need). Ok, so I have stud and block walls, suspended timber floor (WBP). I'm putting marmox boards on both walls and floor. Floor will have a Devi-mat. Using Mapei Keraquick to attach boards to...
  4. judge

    marmox onto ply

    Evening all,ive not worked with marmox before and was wandering what thickness it needs to be for overlaying on 18 mm ply upstairs floor ?:smilewinkgrin:
  5. N

    Marmox board4mm

    Hello everyone. i have a job to do. It's a bathroom tiling. Customer wants me tile part of the wall with mosaic and carry on with ceramic tiles after. Strip of mosaic will go from floor to ceiling. Question is. How can I reduce space for mosaic to be flat with the tiles. Mosaic is 3mm and tiles...
  6. E

    marmox tray and drain

    Hi peeps Just ordering bits for a job ive got coming up has any body had experience with a company called Tilefix. I'm on a very tight budet for the job and trying to save as much as possible every penny counts and all that. There 800x800 tray and drain are £21.61 cheaper than phg who i normally...
  7. M

    Fitting Marmox board onto plasterboard?

    Hi all, Can I mount Marmox board onto plasterboard, and what method would you advise? I could remove platerboard and mount onto stud but I know the studs aren't suitably spaced meaning adding more timber (every 300mm) I did this yesterday on a smaller wall after some good advice off this...
  8. M

    Marmox backer boards-fixing to wall

    Hi all, First post so here goes: I've bought some 10mm Marmox backer boards to line the walls in a walk in style shower area I'm currently installing at home. I'll be installing on 2 walls, both are stud. I've removed plaster board and the stud work is not the best so my thoughts were to mount...
  9. O

    Marmox board

    I have installed marmox board onto a solid wall. Also there a plastic plugs and nails supplied. Was wondering what th drill diameter is for the plugs?
  10. S

    Fitting 12.5mm Marmox onto Brick Work

    Hi Just after some advice, have got some of the large size 12.5mm Marmox boards to fit in cloakroom. Have hacked off old plaster and am back to brick work which isnt bad in terms of being level but dips in and out in places by few mm as they tend to. Am I better of using something like an 8 /...
  11. G

    Adhesive for "amatuer" tiler, 600m Porcelanosa onto Marmox.

    I am tiling my family bathroom and ensuite bathroom floors, both un-heated and will be 6mm Marmox boarded over pretty sound floor boards. I am using 600x600 Porcelanosa Extreme White tiles and would say I am not going to be super quick tiling it as I am a bit of perfectionist and will be taking...
  12. A

    Concrete board (eg NMP) or foam board (eg Marmox)

    Hi Guys, I'm not a tiler so don't get me wrong, I'm a retired chippy doing a self-build. I have done bathrooms for myself in the past and used green board for ceiling, concrete board (NMP) on stud walls covered in Homelux, and concrete board over chipboard covered in Ditra for floor. That worked...
  13. W

    Marmox Washers

    Is there a preference for fixing Marmox to walls, metal or plastic washers......
  14. P

    Marmox Showerlay Formers

    Designed for shower and wetroom applications the Marmox Showerlay is pre-formed to create an effective water slope to the drain. It is a floor level panel that can easily be cut to fit the shower area or to produce an irregular or circular shower base. As with all Marmox products the Showerlay...
  15. P

    Marmox Acrylic Sealant

    A waterproof sealant providing permanent elasticity, developed by Marmox for use with Marmox products. The material has a minimal shrink rate (5%, tested to ASTM C733) and forms safe and permanent bond with most materials such as polystyrene, concrete, metal and plastics. The sealant is touch...
  16. P

    Marmox Metal Washers

    Use with the appropriate stainless steel screws, our slimline metal washer grips tightly into the surface as they become almost flush with the board. Packs of the metal washers are sold in bags of 100. Marmox Metal Washers - PHG Wetrooms
  17. P

    Marmox Showerlay Formers

    Marmox showerlay formers are affordable wet rooms trays and we at PHG wetrooms can offer great prices and quick delivery on quite a few sized trays, straight from stock. Drains for the showerlay formers are also held in stock , along with all ancillary products you may require for your wetroom...
  18. P

    Marmox boards at PHGwetrooms.

    PHG wetrooms can now offer Marmox boards at fantastic prices for larger orders. The perfect waterproof boards for walls and floors . Please contact us for further details and prices. [email protected]
  19. D

    Best prices for Marmox boards.

    PHG wetrooms have great prices on Marmox boards , massive stock ready for delivery.. :thumbsup: from single boards to bulk orders... Waterproof Insulation Boards - PHG Wetrooms
  20. S

    marmox

    Hi all. does marmox need to be tanked. Ive laid 20mm marmox boards down upto showerlay tray siliconed the joints. used the sealing tape then tiled using flexi addy. I was told by marmox tech that there is no need to tank if all of the above is done. Your thoughts appreciated.

Advertisement

Birthdays

Top