plasterboard

  1. I

    Tiling over a join between plastered wall and plasterboard

    The previous tiles on my kitchen wall were removed by cutting out the entirety of the tiled area and replacing plasterboard (image displays one section of this). To avoid the need for any skimming, I'd like to tile straight onto the plasterboard and add a row over and above the join. The...
  2. M

    Tiling over hole in plasterboard and around taps

    I have had new taps and plumbing installed on an existing tiled wall for a freestanding bath. The plumber removed 2 wall tiles to install tapware and water outlets. This has left a hole in the plasterboard where the 2 tiles were. Can anyone advise the best way to replace the 2 tiles, given...
  3. A

    Plasterboard to use

    Hi gang. My son’s shower room needs re plasterboarding beacuse if a leaking shower over the years. There’s 12.5 mm vapour board there at the moment. Do I replace with the same, then tank? Cheers in advance.
  4. M

    Foam boad vs cement board

    What do you pros on here use most then? Ragrdless of customers budget and you choose msterials Xps foam.boards like jackoboard,marmox weidi etc Or Cement boards lile hardie, no.more ply etc with tanking where applicable Or Plasterboard just to throw it in there.tanking where needs be. Dont...
  5. D

    Plasterboard Wall Repairs

    Hi all, I'm a newbie when it comes to tiling. I decided to have a go at refreshing the bland looking tiles in my toilet. I got all the old tiles off the wall to find a bit of a mess! It looks like there was previously an old cistern with an external overflow pipe going through the wall (left...
  6. acaciaguy

    Tanking normal plasterboard

    I have a job coming up to tile a bathroom which will have bath over shower (electric not power). Work has been done before me bath in etc. Walls are new unskimmmed plasterboard. Liquid or membrane tanking should be fine I think. Tiles are within the weight limits for plasterboard. Any thoughts ?
  7. L

    Plasterboard /ceramics

    Does everybody prime standard P/B and if so is a acrylic primer sufficient also does anyone soak ceramics before installation.
  8. S

    Pictures Joining different thickness plasterboard and tile backing board

    I'm currently redoing my shower. It's a 3-walled shower enclosure and so far I've removed the old tiles and water-damaged plasterboard which was there previously (15mm British Gypsum plasterboard). It's a new build house (2006) and I'm now left with the metal studding (think it's again standard...
  9. D

    Refurbishing en-suite with new shower cubical & retiling honeycomb plasterboard wall

    I am planning to upgrade my en-suit room 1.5 m x 1.6 m. Ripping out old shower unit and the wall tiles surrounding the shower cubical. I will be fitting new shower enclosure 900 x 800 mm with new tray, retiling with ceramic 250 x 400 mm the shower area as well as the three full walls and half...
  10. acaciaguy

    Dot and Dab Plasterboard onto painted walls

    Hello all, I know it's not best practice to tile onto painted walls especially when using large format tiles. My question is this - if you Dot and Dab onto painted walls does this not create a similar issue of the paint being behind the plasterboard adhesive - is this why mechanical fixings are...
  11. W

    Mapaigum straight onto plasterboard

    Hi, what are peoples thought about tanking unskimmed plasterboard with mapaigum prior to tiling? Is it an acceptable way to go?
  12. D

    Advice on moisture resistant plasterboard

    Hi guys, I'm in the process of redoing the bathroom. I've removed everything including tiles and found that the plaster is hollow and loose to the brick on 2 walls. So I'm gonna remove back to bare brick on these 2 walls, tank the plasterboard and attach to the walls. I just wanted some...
  13. D

    Tanking on to old plasterboard

    Hi all, apologies if I have not put this is the correct place. I am currently in the process of renovating my bathroom with new suite and 10mm ceramic tiles floor to top. I have striped off my old tiles and I have been left with plasterboard in very poor condition where all the paper has been...
  14. F

    Removing paint from plasterboard before tiling

    Hi guys, I cannot find a decent/fully applicable answer to this anywhere! Please help! Substrate is painted plaster board. It was painted 2 years or so ago by the house builders, trade white, so is all very sound. Tiles are 300x600 so I’m not happy with just scoring the paint to get a key...
  15. Steve_Bcs

    which scrim to use on MR Plasterboard / Hardibacker joints

    Hi, prepping room for tiling. 6mm hardibacker on floor and 12m in shower area. rest of room & ceiling is boarded with moisture resistant plasterboard, I know to use alkaline resistant scrim on the floor & shower corners where the hardibacker joins but as I'm using cement based tile adhesive...
  16. Dan Fitchie

    Plasterboard on bathroom wall

    I've put up marmox backer boards on 3 of the walls in my small bathroom including the wall that holds the loo and basin, side of shower and shower itself. I've bought normal 12.5mm plasterboard for the remaining wall which is furthest away from the bath/ shower (about 1.5m away) to try and save...
  17. B

    Hanging cabinet on travertine tile and plasterboard - what fixings?

    Hi and thanks in advance for any help! I have fitted 12mm thick travertine stone walls on 12.5mm plasterboard with approx 3-4mm adhesive. There is no way to get to any studs so I am looking at using spring toggle screws into the hollow wall behind. But with the combinations above there will be...
  18. R

    Tiling onto plasterboard

    Hiya all, Is it right that if tiling directly onto plasterboard then you should tile on the reverse of the board ? (Brown side) Or is tiling onto the side you usually skim ok ? Is any preperation required ? Thanks in advance
  19. D

    Tanking over wallpapered plasterboard

    hi I want to add a shower to a bath but the room only has wallpapered plasterboard, not sure what type. Can I tank onto it, or strip the wallpaper first? Thanks
  20. S

    Prime Plasterboard before tiling

    Hi All, I decided to strip all of the old plasterboard off the walls in my bathroom (as opposed to overboarding) and will be installing new plasterboard. I will be tanking the shower enclosure with the Bal WP1 kit. I will be fitting 600mm x 300mm porcelain tiles. Do I need to prime the...

Advertisement

Top