self levelling

  1. Dan

    Self Levelling Multi Line Laser

    LIMITED QUANTITY OFFER Dewalt DW089K Self-Levelling Multiline Laser Limited offer apparently. That a good price or what?
  2. J

    Self Levelling Over Bitumen Dpm In 1950 House

    Hi guys I'm a first time house buyer, and I am trying to level a floor to tile. The hardcore underneath the bitumen is old sham and sand from a nearby by Pitt. Then on top of that concrete and a bitumen dpm of around 10-15mm. Problem is over the years when shale or sand absorbs moisture it has...
  3. D

    Self Levelling compound onto green concrete?

    Ive got to lay victorian geometric tiles onto a newly laid (just over a week) concrete surface that isn't flat. The job is external. Would it be best to use a self levelling compound and if so, is there a Self level product suitable for green concrete? If not, would it be possible to lay the...
  4. A

    Advice needed self levelling please :)

    Sup fellas Okay so slightly nervous as I have a floor to level next week. It runs out by 10-12m.... I self levelled a floor a few weeks ago but got it wrong so my confidence is not good right now. What is the best SL to buy. It's going on concrete. Do you any of you use the fast setting stuff...
  5. A

    Self levelling advice.

    Here for advice on this one. People who think I am a pro because of a little argument in which I responded to JT then take it with a pinch of salt and don't use it going forward on every post to have a go at me. It's old news now :) I am here for advice mainly as I have been out the tiling game...
  6. A

    Mapei Primer G dilution - self levelling

    Hello I'll be laying some ceramic floor tiles on top of self levelling compound, I've got some Mapei Primer G but I'm not sure if I should dilute it. Instructions say: Before tiling on gypsum it says to apply neat, ( does this apply on top of self levelling?) Also says do NOT apply in such...
  7. C

    Self Levelling A Concrete Floor

    Hi all. I know there are a few bits of advice on the forums but my question is fairly specific. We are self levelling a 23sq m. concrete floor across 3 rooms in a domestic property. I reckon we will need an average fill of 6mm across the floor or there abouts. To my mind that is 1.38m3 of...
  8. T

    self levelling compound

    hi all I think I need to use a slc as my kitchen floor runs out from halfway across the room to one side of about 5mm ish, I have looked at the wickes latex one at about £18 a bag, easy flow is the most important as I havn't used this stuff before, btw its about 4sq mtrs to level up, not the...
  9. B

    Help! SLC fail - Self levelling compound failed Pro 50

    Hi All I have an issue which I would like to hear your thoughts on. I have had a floor fail on me, and need to get to the bottom of what has happened. The floor is timber, screwed to joists and checked for deflection. Then overlaid with 10mm backer board, screwed to floor. No primer. UFH...
  10. C

    Underfloor heating self levelling

    Hi, Im installing underfloor heating in my new house. The dining kitchen area is 50m2 a large space .Ive put plywood down and screwed every 200mm and now just put insulation boards down styrofoam Blue boards. Im going to put the matting down and pour self levelling compund down but dont know...
  11. T

    Self levelling over thin bitumen residue

    Hi. My floor at home is part screed and part marley tiles. I need to level the floor, so was thinking take the marleys up and cover the bitumen residue ( not even a mil thick) with Arditex NA. Then any more levelling that needs to be done, I can use my normal Ultra leveller on top. Is this...
  12. area tiling

    Self levelling with two different latex products!

    I have to level a kitchen floor tomorrow which is about 20m2, one half of the floor has bitumen on it , which I will be using ardex arditex on, the other is just the normal level flex self levelling compound ! Thinking that the 2 products could react to each other I was planning to put an...
  13. K

    self levelling compound on top of Egger P5 Protect Board

    Hi everyone, Is there any such thing as a self levelling compound that can be directly laid on top of Egger P5 Protect Tongue and Groove Chipboard? My builders have done just that and then tiled on top of it. My tiled floor has failed. The Egger people have been really helpful. They say that...
  14. P

    Recommended self levelling compound

    Need to level out a screed substrate (about 35mm of it) wondering if there is a good, recommended self levelling compound you would suggest? (for laying Travertine tiles)
  15. T

    Slc Method, My Way - How To Use Self Levelling Compound Properly

    I have posted this type of slc method before, just thought I would repeat it if I have got the pics right, dots set by laser runners made from 3-1 compo plus polymer and rapid set adhesive.
  16. S

    Self levelling compound

    Hi I'm new to the forum and need some good advice. We are tiling a small bathroom floor about 158cm x 258cm. We have removed the old cork tiles that were on the floor previously and have scraped and hand sanded the floor left behind. We now want to tile with ceramic tiles but Im not sure if...
  17. C

    self levelling compound

    Hi, I need a lot of self levelling compound to cover my Klima underfloor heating mats the area is roughly 50m2. What is the best stuff to use and how much would I need ? Ive read that a 20kg bag roughly 5mm thick to cover matting roughly does about 2m2 but not sure as ive never put...
  18. A

    Confirmation of Self Levelling Compound required.

    Hi Guys I have a plywood floor overlad with hardie backer board, I was going to feather out the 3/4mm dip in the floor with addy but it turns out my feathering was worse then my plastering.... (who would have known)!!!! Anyway I've decided to carry on with the loose cable underfloor heating...
  19. M

    Make your own self levelling compound?

    Hi, Guys, I have just joined your forum as I have often read your great and informative comments and even though I have been a builder for many years you are never to old to learn. I have a question for all you professional tilers out there. I have had a Screedflo liquid floor laid (with...
  20. C

    97m2 of porcelain to fix...products to use and advice on self levelling

    I have fsoa 100m2 to fix of 600x600 porcelain. The floor is weyroc and getting overboarded and ufh and self levelled. The problem is I am not the best at screeding however I would like to become brilliant at it. I generally use a float and a straight edge to get it as perfect as possible...

Advertisement

Top