Hi, Guys,
I have just joined your forum as I have often read your great and informative comments and even though I have been a builder for many years you are never to old to learn. I have a question for all you professional tilers out there.
I have had a Screedflo liquid floor laid (with...
martin9093
Thread
aus
compound
levellinglevelling compound
mixing
selfselflevellingselflevelling compound
usa
your
I have fsoa 100m2 to fix of 600x600 porcelain. The floor is weyroc and getting overboarded and ufh and self levelled.
The problem is I am not the best at screeding however I would like to become brilliant at it. I generally use a float and a straight edge to get it as perfect as possible...
cam_low
Thread
advice
aus
compound
levelling
mixing
porcelain
porcelain tile
porcelain tiles
products
selfselflevelling
usa
hi all
the floor that im working on is level from end to end but hollows out in the middle as much as 8mm,
its timber floor with cement board glued ans screwed,whats the best slc to use to keep the floor height to a minimum and just fill the hollow,ive used weber floor flex in the past but its...
Morning all,
I need to prepare my kitchen floor so that it can take tumbled/chipped edge trav and need a little advise.
The area is approximately 5 x 4m2, and the current concrete slab is split into two parts. Each part of the slab was poured at different times (they were previously two...
Dean A
Thread
aus
compound
help
levelling
mixing
selfselflevelling
slab
usa
Hi there,
I posted a while ago prior to carrying out prep work for tiling a new bathroom with Travertine. I followed the recommendation and adhered backerboard over the plastered walls using weber SPF rapid and mechanical fixings but would like some further advice on the floor.
At present the...
bendy
Thread
backerboard
compound
levelling
mixing
selfselflevelling
usa
Hi All
Has anyone had experience of using this product,have a large floor to do, was going to use with 709 liquid but cant find on their technical data if it is suitable to use with ufh
many thanks
I'm new to the forum and i'm hoping to get some advice from those more learned than myself, I'm having 32m2 of tiling done which will be over UFH the subfloor is concrete screed my tiler advised he would like to use a self levelling compound to cover cables and as a good surface to tile on...
loxlei
Thread
can
compound
flexible
levellinglevelling compound
mixing
selfselflevellingselflevelling compound
usa
I've got about 5 bags of this that has been dry stored for a few months. It was given to me to get me over a problem of weber's creation - long story. I didn't need as much as I thought I did to sort the mess out, and no one (weber or retailer) wanted them back.
They're here in Cornwall if...
cornish_crofter
Thread
adhesive
compound
free
home
levellinglevelling compound
mixing
selfselflevellingselflevelling compound
usa
weber
weber adhesive
I have been researching the best way to prepare an old screed floor of 45m2 with no dpm, ready to take uniclic bamboo flooring. As there is a lot of knowledge about SLC on here thought i would ask.
I have used a water based epoxy primer paint for the DPM with aggregate added to provide a...
SiRockson
Thread
compound
levellinglevelling compound
mixing
newbie
selfselflevellingselflevelling compound
usa
:drool5:
Hey up.
Im tiling my uncles kitchen floor in a couple of weeks, and I want to do a good job. The floor is about 15sqm l cove.
Its concrete but the problem is its levels and uneveness is all over the place. Ive put a level and straight edge on it and there are 3 high points which...
John the tile
Thread
advice
compound
levelling
mixing
please
questions
selfselflevelling
usa
Hi'
I recently installed ufh in the ground floor of my house. went on holiday while the builders put the screed down but came back not impressed with there work.
The screed is a normal sand/cement screed, i had planned to have a wooden (engineered) floor but the screed does not look level...
Unregistered
Thread
compound
floor
levelling
mixing
selfselflevelling
ufh
usa
Howdy all.
Wonder if you can help with a question about sealing a DIY SLC job before tiling it.
A professional recommended using a self levelling compound on an old concrete kitchen floor but let us down due to being too busy to do the job.
A 2nd "professional" tried to put down a SLC but...
Hexagon
Thread
compound
coverage
diy
levellinglevelling compound
liquid
mixing
paint
seal
sealing
selfselflevellingselflevelling compound
usa
I'm in the process of a new build in the Western Isles and in need of some advice.
I've installed wet UFH and it's been screeded badly and neeeds to be filled in and lowered in places. I can lower to a degree with a hired polisher, but should i fill in with the self levelling screed before or...
caluson
Thread
compound
levelling
mixing
pva
screed
selfselflevelling
usa
HI guys n gals
wouldnt let me post this on normal forum so here goes...
done a bit of self levelling before(always onto concrete with the stuff from topps-just add water)always been 4 or 5m jobs,but this week landed 3 jobs which all need kitchen concrete floors levelling,all between 10-20m. Now...
Hi folks, I am after some advice regarding my kitchen floor. The kitchen and hall used to be comprised of kitchen, 2 x brick pantries, separate WC and the adjacent hall.
I have removed the pantries and WC and made the kitchen and hall an interconnecting space. I now have five slightly different...
williamraff
Thread
compound
floor
levellinglevelling compound
mixing
screed
selfselflevellingselflevelling compound
usa
I used self levelling compound for the first time but obviolsy didn't use enough to fill a large dip in the floor. Can I build up the layers with more self levelling compound and if so do I need to treat the first layer before adding a second?
If not what advice can you give me?
Kindest...
Aspesim
Thread
compound
help
levellinglevelling compound
mixing
selfselflevellingselflevelling compound
usa
I thought that one of the benefits of gyvlon screeds are it's self levelling capabilities - have I mis-understood?
This is what I was faced with on Tuesday and the customer expected me to fix 600 x600 porcelain :mad2::mad2:.
Daz
Thread
compound
levelling
mixing
screed
selfselflevelling
usa
Hello all, I'm just about to lay my first Devimat UFH. The substrates are 18mm floor boards, 12mm ply (all screwed down at 300mm) & 10mm Marmox insulation boards on bathroom floor.
The floor is completely flat & level. Do I still need to use a slc, as the devi instructions say tile straight...
ap222
Thread
compound
levellinglevelling compound
mixing
selfselflevellingselflevelling compound
ufh
usa
Dewalt Laser DW087
Dewalt DW087K Self Levelling Line Laser Kit complete with 3 x AA batteries, wall mount bracket and heavy duty carrying case.
Wall mount bracket with magnetic slide mount. clip on/screw on
Laser has screw fitting on base to be used with laser pole (below) or tripod...
DHTiling
Thread
compound
dewalt
find a tiler
laser
levelling
line
mixing
selfselflevelling
tiler
tilers directory
trade
usa
hey up. im gona be tiling onto a floor with this stuff down. do i need to prime it first??
Broken Link Removed
this is the stuff, on one of my other threads i was advised to use a flexible adhesive...
thanks for any help
John the tile
Thread
compound
floor
latex
levelling
mixing
selfselflevelling
usa