Hi folks - first post here but a long time reader, so hello! :smile5:
Now onto my question - would be very grateful if anyone could help! After long research I'm well aware the recommended way to install a shower tray is to do so after moisture-resistant board has already been fitted, and to...
Selling my Makita 8391DWPE cordless 18v drill set.
Included is-
2 x 1.3ah NICD Batteries
1 x DC1804 Charger
1 x ML180 torch
1 x Carry Case
2 x drill bit holders
See eBay ad for more details....
http://bit.ly/1bZSNIt
Would end auction early for £50 with delivery free!
evening all,,, i posted yesterday but didnt get much feed back,, and after thinking about the leveling compound over wood situation,, would it be ok to use a coat of flexy rapid set adhesive to level the plywood sub floor first before tiling,, bearing in mind im only talking about slight bumps...
Can anyone recommend an easy methods method of removing rapid set adhesive from the back of a porcelain tile?
Can I soak it or does it have to be sanded or ground off?
Hlm
Thread
aus
rapid
rapid set
removing
set
tile
tile adhesive
usa
I have a question. My tile guy set his shower membrane in the weep drain, then the rock board over the membrane. All seems well. One thing he did do that I question is that he fastened the rockboard through the membrane, slightly below the top of the mortar bed but well above (2 inches)...
Did any of you used that set marcrist ddm1 with pc850 core bits? I was recommend that by marcrist rep. On trade day at ctd but i couldn't find any reviews online. Cheapest i found online its just under 400f so i would like to hear something about that befor buying.
mixed up a gorilla tub of it today..by the time I got upstairs it had gone off !..its hot but the weber was fine the day before..so dug it out and tried again..same thing..CTD say its the weather !
Is anyone using rapid set at the moment, i was in my supplier earlier and they have just had 30mtrs of porcelain gone out, going in a conservatory and the guy insisted on rapid, he must be a superman. The pot life must only be about 5 mins i would have thought:yikes:
Evening All.
Another flowing through rooms floor.
Going in tomorrow to start and the customer prefers the set out where in the kitchen(large glass doors) there is a full tile to the left of the wall when the grout line is centered on the glass doors but it leaves a 70mm slither down the right...
Hi all, Just wondering if anyone uses a slow set SPF when tiling walls & floors? I tend to use rapid set on everything but I find that sometimes it sets to early in the bucket that I mix up and I end up wasting a lot.
All up and working know.
Cheers Dan.
Thoughts on the set out for the glass room.
The tiles have been centred on a 20ft glass front entrance which then then runs through the hallway.
Any thoughts on wether to centre on the vertical post in the glass room or run the grout lines through from...
Johnson Tiles has announced the proposal to reduce staffing levels, as part of a programme of 'restructuring'. It is understood staff at the factory, which employs 418 workers were told the news in a meeting last week when a 30 day consultation period was announced. The company have blamed the...
Hello,
I was hoping somebody could help with our tiling problem. Last week we tiled our conservatory with homebase ceramic tiles. We had a very thick chipboard floor, so we then screwed on exterior plywood on top. Then we used Wickes powdered adhesive and then Wickes powdered grey grout. Within...
stakee
Thread
adhesive
aus
not
set
tile
tile adhesive
usa
wickes
Hi,
When tiling large 30x60cm porcelain tiles onto primed skimmed plaster would it be better to use rapid set or normal adhesive? Obviously there is the time advantage but any downsides to rapid set? Sorry, am clueless!
Thank you.
Unregistered
Thread
adhesive
aus
rapid
rapid setset
tile adhesive
usa
wall
walls
would
not sure if anyone has mentioned this but thought i'd say a few words on webers latest addition to it's line of adhesives. the weber rep was at the ctd trade week at maidstone last week and was promoting this which he told me is suitable for large format porcelaine and stone too. so not to be...
Hi All,
I am a customer with 45 m2 of 60 x 60 Porcelain floor tiles to be laid and a shopping list to buy 23 x 20 kg bags Fast set flexible white adhesive. My builder who I trust , has requested this much adhesive as the floor is not even and he will use the adhesive to level out. My problem is...
Julie
Thread
adhesive
aus
flexible
set
tile adhesive
usa
which
white
3 piece Forged Steel level set down to £14.99 inc carry case at screwfix
600mm
400mm
229mm
http://m.screwfix.com/p/forge-steel-hi-vis-box-level-set-3pcs/90240?cm_mmc=Email-_-E13W03B-_-Stickies1-_-ForgeSteelLevelSet
Thought some of you might like