I am going to be laying some 333x333x8mm porcies. I haven't worked out a pattern yet as i am still strengthening the plywood floor.
Room is 8 - 8.5ft wide and 24ft long.
What size spacers would you recommend. and any specific pattern that you think would look good. I have extra tiles, so...
Visited a client today who had bought tiles and trim from B&Q , the trim and tiles are 6mm however the tile does not fit the trim, surely you need a larger trim to take in account of adhesive. is there a rule of thumb?
Hi guys. I was wondering if there was a way of calculating the resulting bed depth from the notch size.
Take for example a 8mm square notch trowel. When applied at 45degrees this reduces the bed to around 6mm. Then when the tile is placed on to the bed and twisted in how much does this...
Hey all, i'm about to do a full bathroom(walls and floors) the tiles havent been choosen yet but the customer will want the lines to match, walls and floor. My question is this, given that the spaces between tiles are bigger on the floor than the walls how can i match the two up without losing...
Hello everyone.
We're about to start laying some slate floor tiles that are made up of 4 sizes in a pack. Each pack contains 2 of 20 x 20, 1 of 20 x 40, 2 of 40 x 40 and 1 of 40 x 60.
We got the tiles from Tile Giant who provided a pattern but it's not random enough as it is effectively a...
Hi all.
Hope someone can help.
I am fixing 600x300 tile in landscape way on a shower wall.
When setting out I have read that the bottom wall tile should never be a whole one, so that you can compensate for the floor being out. Is this correct?
So, how high do you guys set your datum line...
essexsi
Thread
out
setting
setting out
should
size
tile
tilers
usa
wall
Hi all,
Thanks for the great help I have recieved in other questions.
Hopefully a couple of quick and easy answers for you pro's!!!
The following is in a walk in shower and the area will be tanked appropriately. I think I am right to be using a flexi adhesive on both with a long bucket life as...
essexsi
Thread
grout
line
please
size
tile
tile grout
tiles
tiling trowel
trowel
usa
which
Can anyone tell me the correct size (notch size) and shape (square, half round etc) to use for putting wall tiles up. I will be using Mapei Keraquick mixed with water. The walls are plastered brick, paint sanded off and Mapei primer applied. Tiles are 25mm x 40mm x0.8.
Cheers
Im fitting 31x45cm tiles to the wall using 2mm spacers, but was wondering if I should use the 2mm spacers with the 31x31 floor tiles that I have, or go for something bigger?
I have purchased a load of 4mm spacers, but now unsure what to do.
or
do I go 3mm for everything
The tiles are Padova...
What size tiles do you recommend for a wetroom floor that has a 1200 x 1200 former ?
I've been told it's best size is under 100mm x 100mm square otherwise the fall is compromised on the tray, is this correct ?
Im putting up 31x45 ceramic wall tiles - would a 5mm sq notched trowel be ok for the adhesive, sorry about all the questions but doing a job for mother in law , so it has to be right :7:
What is the correct size notch trowel to use to lay the following tiles.....
Niro Granite Regal Vanilla porcelain.
These tiles are 10 mm thick and 300mm x 300mm square. I am laying onto plywood base. The adhesive I will be using is mapei keraquick mixed with latex plus.
I have a...
STEVEROG
Thread
help
notch size
should
size
tiling trowel
trowel
usa
what
Hi, im just about to start tiling a bathroom suite on top of old cermaics. im going to use bal white star. i have always used an 8mm nothced trowel for wall tiling but have decided to go with what the tub says. For white star it says i should be using a notched trowel in dry areas ans solid bed...
Hi all
I am soon to purchase the bathroom fitters kit from 365 drills as have 2 bathrooms on the horizon.
Can anybody recommend any other sizes over 40mm they think i'll certainly need for the future.
Cheers
Kev
Hi Guys,
when tiling over UFH matting and not putting self leveler over it do you use a deeper trowel, because of the thickness of the wires and to get 100% coverage I was thinking of using a 12mm, would appreciate your comments,
Harry.
Hi all I always use a 20 mm round notch with traventine on floors but would it be the same on walls? I thought a 8mm square notch would be ok. dont know whats best. thanks