What thickness?
I am tiling the hall and kitchen and under stairs wc. There is tongue and groove boards down at the moment, I'm going to take them up and lay ply straight on the joists. What determines the size of the ply I lay?
I have 23sm to cover, any suggestions where I buy it?
Thanks
As posted elsewhere, I'm about to start some tiling in the bathroom. Tiles are 330x250x8 ceramics onto plasterboard. Going to be using Mapei P9 addy. Just went to get me trowel and discovered that it's a 6mm square notched affair. Would this be suitable for my situation or should I be nipping...
Hi Guys
About to order the stone for the project.
The bathroom floor is small 1700mm x 1500mm
What size tile do you think would look best
300x300 or 600x600
Cheers Phil
Hi everybody,
I have a wrestled with every conceivable problem in surface preparation and today got to the point of actually putting down the first ceramic floor tiles in our Kitchen, family room and utility room.
Ah! now comes all the rewarding bit I thought: how could I be so naive?
The floor...
Hi Guys
I just about to put some Floor/Wall tiles on to the Wall (Wall is Aqua Board) these tiles are 600x300 ceramic. What size notch trowel would I need?
Regards
Simon.
started a job today, once i pulled down the tiles that were already there i realised there was wall paper under neath, took me all day to get it off. was going to do a wall before i left but the adhesive was only covering the edges (250mm x 400mm tiles) so i stoped, do i just need bigger trowel...
Recently been asked to quote for a multi size pattern granite floor ! I have never done one before or even seen one ??? Plenty of travertine slate but not granite...anyone else ? Any pics ?
Morning all - help required.....
I am doing my first porcelain floor job next week , and the tiles I am laying are
Square gloss surface porcelain
Dimensions 440 mm x 440 mm
Depth 10mm
These are being laid on Marmox backerboard and I wanted advice as to the best notch-size trowel to use...
MartinH
Thread
adhesive
floor
floor tiles
porcelain
porcelain floor
porcelain tile
size
tile
tile adhesive
tiles
tiling trowel
trowel
usa
what
Hi All,
I'm doing some bathroom jobs over the next 2 months which both require custom sized glass.
Having spent the morning ringing around I'm pretty astounded in the difference in quotes I've been given...including one for 60 quid delivery!
Can anyone recommend a reliable, quality & cheap...
Hi everyone, this looks like a knowledgable place to get some advice!
I am planning to totally redo my kitchen this summer, in a 1960s end-of-terrace that hasn't had a new kitchen since it was built. As you come into the house, the door into the kitchen opens off to the right, halfway down the...
Thanks to all of you who have replied to my pervious threads
I have decided to install plasterboard on 3 walls and Tile backing board on one wall which will be having the larger/heavier floor and wall tiles on it. These tiles are Porcelain (QRock tiles) sixe 600 x 300mm each.
What size (mm)...
I am about to tile my kitchen floor with 600 x 300 porcelin tiles, I am going onto a concrete floor. The floor is fairly level / flat.
Could someone recommend which size trowel I need for the job? and a good adhesive?
I'm laying my 1st polished marble floor for my sister and need some advise. She has a new screed floor (been down about 2 months) and has wet underfloor heating installed which has been on up until a week ago and is perfectly level with no joins / cracks in it. the tiles are 600 x 600 x 12mm...
mrgdclark
Thread
size
spacer
spacing
tile spacer
tiling trowel
trowel
usa
what
Hi guys, after some more advice. Im about to start tiling new ensuite with 450x300x10mm ceramics. What size trowel do you recomend, vast majority of tiles are going onto unscimmed plasterboard ( except where ive tanked ) while the rest will be going onto a small scimmed concrete block wall...
will be starting to tile my shower enclosure tomorrow - tiles will come just beyond where shower enclosure will go and will be finishing them with a silver L shape trim - question is trim recommended by CTD is 10mm deep , same as tiles - thinking about it if I bed the trim so it touches the wall...
Am about to tile my corner shower enclosure - tile size is 500 x 250 ceramics - using bal supercover rapid flex - what size trowel should I be using? - one wall is aquapanel the other skimmed - skimmed wall has slight dip of about 2/3 mm in the middle. Have tanked both walls. Have got a 6mm...
I might need one of these on my next job. ive never used one before so dont know what size bed and roughly what m2 to expect from a 20kg bag of adhesive?
I'm about to turn the bathroom into a wetroom and was wondering about tile sizes.
The room's about 3.5m square and I'm using Trav tiles, the mrs likes some 305 x 457mm tiles and I was wondering if they would look ok on the walls and floor and what config would look best.
If this is not advisable...
Hi All
What size and formatt should I tile my small bathroom floor with, its only 3m sq? The walls are going to be tiled with 450 x 300 approx tiles in a 1/2 or 1/3 brick bond pattern.
Should I use 300 x 300 in a straight pattern or diaganol or brick bond?
Do I line up any grout lines...
mmmadman
Thread
bathroom
floor
floor tiles
format
size
small
small bathroom
tile
tiles
usa
Hi there
having spoken with all the local tilers in the York area without any luck I am looking for divine intervention and help
I am looking to source tiles which are around 20 years old .
A number of tiles in the bathroom have come away with a number being broken . Instead of retiling...