Dear All
Hope someone can help! Tiling 800x800 shower enclosure, have purchased the following Bal items for the tiler following advice available here:
single part flexible adhesive
waterproofing kit
microflex grout
sealant
The walls have been replastered by plasterer but house is mega old...
Hi all,
Need to get some tile spacers for the following:
Entrance/kitchen FLOOR: 33sq/m of 10mm porcelain tile, tile size 300x600mm
Bathroom Floor: 5sq/m meters of 12mm porcelain tile, tile size 200x200mm
Bathroom wall (also used as shower backing) 20sq/m of 8.5mm 250x400mm.
Is there a norm...
Hi all
What's the best spacer/gap size for large ceramic travertine effect wall tiles 300 x 450mm and floor 300 x 300mm, or is it persnal preferance I was going to go with 2mm.....???
Cheers.......:smilewinkgrin:
mmmadman
Thread
large
size
spacer
spacing
tile
tile spacer
tiles
usa
Do smaller tiles make a room look bigger?
We will be using mainly white tiles with a border along a 3m long by about 2.5m high wall which will have a shower cubicle and bath beside it and we are keen for any tips on which size of tile to use to maximise the size.
Thanks
Chrissy
We're having a new bathroom built by the same builders who did a downstairs extension for us. I've been to one of their current builds to look at a similar wetroom and the process involved.
It had a 900 square Aquadec and Tilesafe membrane in an alcove of 1200 wide (not sure how far out the...
Unregistered
Thread
size
tank
tanking
usa
waterproofing
wetroom
wetroom tiling
Hi everyone - I have just joined your excellent TilersForum site.
I am a keen DIY'er and have successfully tiled a few jobs before and am just about to start tiling my ensuite bathroom with 500 x 200 x 8 ceramic wall tiles - bigger than anything I've used before. What size trowel should I use...
Hi,
Is there any good methods for Creating a recess the size of a tile in a stud wall.
My customer has asked this so as to put soaps and shower gels etc in the shower area as opposed to a shelf in there.
Cheers.
Vin.:thumbsup:
Hi,
Due to tile a bathroom in 600x300 Copper honed slate, im doing the walls and floor, just wondered what the usual spacer size is used for this.
I was personally thinking of 2.5 mm. what do you guys and girls think?
Cheers.
Vinnie.:thumbsup:
I've been advised on here I need a 10mm half moon adhesive trowel to lay my 610mm x 405mm 12mm thick travertine on the plasterboard walls and marine ply floor but I'm a little confused how the size is measured is it the depth of the notch or the width of the that relates to the size. If its the...
I'm just about to lay some porcelain floor tiles. I think I've finally got the preparation right, so I've just started dry laying the tiles to check the cut tile sizes, etc.
It's only now I realise just how much tiles can vary in size! I've got a mix of 600x400, 400x400, 400x200 and 200x200...
I have tackled ceramic tiling in a bathroom before around bath and sink, I used a 6mm square notched trowel. I am now going to tackle my old shower which I have ripped out I have re studded the wall and sheeted it with green board Gyproc and tanked it. I have 300x300mm ceramic tiles. I intend to...
Hi
Firstly i can get good trade prices on Weber products so idealy its a weber product im after or unless someone on her can point me in the right direction so i can get trade on Mapei which seems to be most people favorite.
Tile size 360x275x9 Ceramic
Fixing to newly boarded walls and one...
I'v got some mosaics to put on a 2m wetroom floor they are 50mmx50mm x 5mm but are ok to go on a floor, i'v never put mosaic on a floor before, and i'm not to sure what size trowel to use. Any advice will be appreciated. Thanks
A couple of days ago while on here the font size went small and i can't seem to get it back to normal,it's only on this website not any others. Anyone help?
Hi guys, Am starting out very soon after doing a course, have been on here non stop for the last 2 months taking in all the info from you professionals. I've come to the conclusion that i will definitely need a good size manual cutter, possibly 2, but what size wet cutter do i really need? How...