I’ve got Hardiebackers for my en suite walls and will be tanking them with BAL WP1.
Do I then need to apply a primer for the adhesive after tanking?
I’ll be using Mapei Keraflex S1 as my adhesive. Cheers.
hi all,
After abit if advice re boards for shower and tanking....
My 1200x800 shower has two existing walls within it, one of plasterboard stud wall and the other plastered masonry.
I was thinking of removing the plasterboard within the shower area and replacing with either wedi or Hardie...
Hello everyone,
I tried to avoid asking this question as I'm sure you're all sick of seeing the same questions being asked, but after days of research I am unable to choose the best flooring to put down for a small ground floor wetroom on a suspended timber floor. 1.65x1.85m room dimensions...
Read in some other forum that some people skim the Aquapanel with tile adhesive then paint the tanking paste on.
I've ot one of the Mapei tanking kits to tank a shower area. Thought you could just paint it onto the Aquapanel initially.
I'm after a wetroom screen for mum's bathroom.
We wanted a tall wetroom screen, but didn't realise they'd be quite so costly.
£260 for hardened glass that measures 2250mm x 880mm x 10mm.
The coating which is supposed to help with cleaning and limescale is an extra £110.
So a total £370.
Is...
Morgan Ereku
Thread
former
screen
should
shower
shower tray
tanking
waterproofing
wetroom
wetroom tiling
Just been sent this from Whitewaters (Pools)!
30mm thick pool & spa copings. 80sq mts of 60x40 honed travertine on insulation boards to levels and falls. 100sq mts of 20mm blue mosaic. Split faced quartz to end wall.
Not in picture 3 changing rooms and staircase to main house.
One man job -...
Hi,
I am going to build a small (7m2) wet room on the ground floor of a granite farmhouse. The rest of the ground floor is drained breathable limecrete.
In the wetroom at present there is compressed (structural) drainable Foam Glass insulation (Misapor). The insulating slab (lime/Misapor/sand)...
morning,
So I’m tiling the floor today in the wetroom (yup, still on this job!).
The tray I’m doing in 10mm porcelain mosaic (4mm addy bed), the remainder in 10mm porcelain 60x30 (12mm addy bed).
The mosaic will sit lower. I need to raise it by 4mm so there isn’t a step, how would I do that...
I'm installing some acrylic shower panels onto Aquapanel. Ideally I'd like to seal the shower tray to the wall with Classi seal or similar then tank over before installing panels, for the best possible seal. The glossy acrylic panels I'm putting in (lustrolite) need a neutral cure Silicon...
Hi, I'd like to fit in a shower screen 1850 x 900.
The new style of screen on the likes of Houzzz look ver minimialist without the long bracket going to a wall or ceiling to provide support. I'm wondering how they make it stable enough?
I've uploaded a picture with labels "A" and "B" on it...
Morgan Ereku
Thread
former
glass
how
screen
shower
shower tray
tanking
thickness
waterproofing
wetroom
wetroom tiling
Hi All
Just a quick hello and introduction. I have an approach to wetroom floors and walls that doesn’t require tanking or tiling. We make floors and shower trays in sections that can be joined seamlessly on site, to appear as 1 piece, and can be installed on plywood or concrete bases. The...
My most recent DIY project has been to convert my en-suite into a wetroom. Been at it for months and now at the finishing stage. Turned on the shower for the 1st time and I have pooling in the centre of the floor.
I have obviously misjudged how large a shower tray footprint I require.
I have...
Steve Wilson
Thread
canada
fix
how
tanking
waterproofing
wetroom
wetroom tiling
Hi, my mum would love a wetroom, but finding it difficult to fugure out some of the practicalities.
In houzz etc. we see wetrooms with few tile cuts which look glorious. Somehow the tiles must be angled to allow the water to drain away. But I'm unsure of how to find these trays online?
Should...
hi all,
Newbie on the site but reading through your post has really helped.
A builder is installing an wet room in my new loft conversion. I wanted to know what’s the best system i.e tray and membrane or tray and roll on?
I know about the highly recommended Impey tray and kits but was...
Djhitman
Thread
not
tank
tanking
waterproofing
wetroom
wetroom tiling
First time post to ask all you experts on here-thanks in advance for any assistance you can provide.
I have built a pizza oven (imagine an igloo shape) which I intend to tile with a glass mosaic type of tile which will need to be frost proof but not heat proof as I have loads of insulation in...
Hi,
We've just had a wetroom put in and everything has gone really well and I'm happy apart from the tiling around the drain. I assume this isn't the finish/ standard that I should be getting? Or does it just need to be grouted/siliconed?
Hello guys, I'm looking for some advice regarding a Wetroom I'm planning, I'm out my depth with the amount of options available and just looking for some friendly guidance.
The house is pretty old and I'm going back to scratch to start the install. I've taken out the uneven floorboards and...
LG007
Thread
advice
just
looking
tanking
waterproofing
wetroom
wetroom tiling
Hi all,
My wetroom is going to be refurbished after my impey tray failed after 10 years. Wetroom is 2m x 3m.
Existing Wetroom:
I have decided to remove the whole floor, but leave the walls where the sink and radiator is. However, the bottom row of tiles from these 2 walls will be...
Excellent Tanking Product!
The kit comprises of :-
- Gloves
- Tanking coating (2.5kg)
- 10M of tape
- 2 x Internal corner pieces.
The system works really well and IMHO one of the best paint on membranes on the market. Arguably the best I have used.
No primer is required, you simply paint on...
Waluigi
Thread
adhesive
grout
review
tank
tanking
tilemaster
tilemaster adhesive
waterproofing
wetroom