Faultyblunt wheel on Rubi TX-1200?

[One Day]

got one specially for the job and would cut them Mark

You mean "wouldn't" ?

 

[J Sid]

yes wouldn't

 

[One Day]

yes wouldn't

Not surprised. Even a magical sigma can't sometimes.

 

[acaciaguy]

I come across some porc that my sigma won’t cut. Tend to be ones from sheds that clients provide.

 

[Andy Allen]

Truth is more and more porcelain is being over fired and is impossible to break cleanly.
I'm at the stage where I insist on test cutting before agreeing a price on larger jobs.

Totally agree with you...
Maybe we should all go a strike till the supplier's get there act together....

I'll get the ball rolling on Friday...

 

[Spare Tool]

Had this recently with some tensioned 800's, had 12 on site, needed 12 and it was the last 12 tiles in the country, put a new 8mm wheel in the Tx, cut a small strip off your waste edge, doesn't matter if that breaks off line but it will release some of the tension in the tile then go for your measured cut, it helped a lot I found..

 

[Italy]

you can't because you all use a push-type tile cutter, try one with a pull. never had problems.