Montolit News Montolit Tilers Tools | Montolit tiling tool news and reviews

[Old Mod]

raimondi, is not the same.
http://www.raimondispa.com/folderpd...ature_grandi_formati-TAGLIO-2016-I-GB-low.pdf

The table antonio, not cutter.

 

[Italy]

The table antonio, not cutter.

ahhhhh sorry compry,
one has lists in the horizontal and the other vertical.
I had already seen.

 

[Italy]

Fps 35
Fps 75

 

[Italy]

Product Description

Bevel Ease chamfers and stress relieves rough holes in glass, ceramic and porcelain tiles.
Diamond bit for a smooth, high-end finish.

Very useful to reduce the risk of cracking with standard and large format tiles subjected to tension (ex tightened plumbing, led lights etc)

Very useful to improve the edge finishing of exposed holes

Dry or wet use
Grinder use with separate adaptor

Adaptors are also available for drill machines

Item codes:

FPS35 (for holes from 5mm (3/16") to 35mm (1 - 3/8")
FPS75 (for holes from 35mm (1 - 3/8") to 75mm (3")

NOTE! This is not a core bit for drilling. It doesn’t make the hole but it bevel the hole only.

 

[Italy]

Product Description

Bevel Ease chamfers and stress relieves rough holes in glass, ceramic and porcelain tiles.
Diamond bit for a smooth, high-end finish.

Very useful to reduce the risk of cracking with standard and large format tiles subjected to tension (ex tightened plumbing, led lights etc)

Very useful to improve the edge finishing of exposed holes

Dry or wet use
Grinder use with separate adaptor

Adaptors are also available for drill machines

Item codes:

FPS35 (for holes from 5mm (3/16") to 35mm (1 - 3/8")
FPS75 (for holes from 35mm (1 - 3/8") to 75mm (3")

NOTE! This is not a core bit for drilling. It doesn’t make the hole but it bevel the hole only.

ordered...

 

[Old Mod]

ordered...

Quanta costa Antonio?

 

[Italy]

Quanta costa Antonio?

I do not know..... ahah
when arrived, I'll tell you

 

[Italy]

a question, someone uses blade cgx freccia oro?
It is better than evo2?
today ordered two pieces, I still have to test?

 

[One Day]

a question, someone uses blade cgx freccia oro?
It is better than evo2?
today ordered two pieces, I still have to test?

I Have one Antonio. It's not any better. Still a great blade though.

 

[Italy]

Arrived, montolit sent them again.
The first shipment was lost ....
Mystery and fortune for another reseller.

 

[Simons70]

I order Sigma last night....212 euro

 

[Italy]

I order Sigma last night....212 euro

you have to post in the sigma trend. not trend montolit.
ahahha
good

 

[Italy]

My montolit collection

 

[Dan]

My montolit collection

View attachment 90108

Are those blocks for sharpening the blades?

 

[Italy]

Are those blocks for sharpening the blades?

Yes dan, the white for blades and bits, to water.
Black, for dry ones.
I still have another collection but not montolit. (sigma)