Guest viewing is limited

recent job

Tilers Forums Official Sponsors

hello
Today started new bathroom renovation, and just want to share why grout is cracking sometimes :thumbsdown:,
IMG_3643.jpg

IMG_3639.jpg
IMG_3638.jpg
 
the top picture is almost a solid bed with the floor tile but what is the substrate, the dot and dab says it all on the wall tiles:yikes:
 
i did sample today, primed bit of floor with primer G, and glued ''ditra'' mating, will try tomorrow to peal off, will see if it strong enough :20:
 
they pictures are shocking,and something as simple as priming the floor would have saved all the hassle
 
If that is an anhydrite floor in a bathroom then i advise it is tanked..

Gypsum floors do not like getting overly wet.
 
hello
Friday finished this job, was 2 layers of plasterboard so replaced 1 layer with hardibacker, I primed floor and then used uncoupling membrane on anhydrite screed,
hope you like it
Thanks
IMG_3791.jpg
IMG_3805.jpg

IMG_3815.jpg
 

Featured Threads

Advertisement

Weekly Email Digest

Back
Top

Click Here to Register for Free / Remove Ad