Discuss Sand And Cement As Adhesive? in the Tile Adhesive and Grout Advice area at TilersForums.com.

GAZ5518

TF
Esteemed
Arms
142
558
EPSOM
I have fond memories of knocking up yards of sand and cement by hand/ shovel when I started working with my Father who was an old school tiler...Showed me how to screed and lay using a slurry.. Those were the days .... Glad they are flipping gone though!!
Blimmin hard work..
 

Ste-G

TF
Arms
111
398
Merseyside
I have fond memories of knocking up yards of sand and cement by hand/ shovel when I started working with my Father who was an old school tiler...Showed me how to screed and lay using a slurry.. Those were the days .... Glad they are flipping gone though!!
Blimmin hard work..
A couple of builders I know were screeding a floor and had a lad from the pub labouring on them. They were just finishing off when they realised they were going to be short of gear, having already cleaned the mixer they told the labourer to go and do a mix by hand.
After a while they went outside to see what was taking so long only to find the labourer on his knees with his hands in the sand and cement like he was making pastery. When they asked him what he was doing he said " you told me to do a mix by hand". This IS a true story.
 
T

Tile Shop

This thread is one of the most interesting and insightful I've read.

I know with various additives it can be used in a lot of situations. But can anyone think of any situation where this cannot be use or tiles it can't be used with?

How is it mixed (ratios)?
Does the floor need soaking?
Do the tiles need wetting?
Setting time?
Bed thickness (minimum and maximum)?
 
I

Italy

This thread is one of the most interesting and insightful I've read.

I know with various additives it can be used in a lot of situations. But can anyone think of any situation where this cannot be use or tiles it can't be used with?

How is it mixed (ratios)?
Does the floor need soaking?
Do the tiles need wetting?
Setting time?
Bed thickness (minimum and maximum)?
:eek::eek::eek::eek::eek::eek::eek: :hearnoevil::seenoevil::speaknoevil: ahahhaha
 
I

Italy

A couple of builders I know were screeding a floor and had a lad from the pub labouring on them. They were just finishing off when they realised they were going to be short of gear, having already cleaned the mixer they told the labourer to go and do a mix by hand.
After a while they went outside to see what was taking so long only to find the labourer on his knees with his hands in the sand and cement like he was making pastery. When they asked him what he was doing he said " you told me to do a mix by hand". This IS a true story.
View: https://www.youtube.com/watch?v=BukLvXtx7VM

is good for work
 

bansko

TF
21
188
here in france and im sure mainland europe sand cement screed is the norm .directly after posing the screed portland cement is thrown on tge floor and tiles laid straight after .first time I seen that been done I thaught I was in the middle ages but it is very common here almost all houses are done this way.it is very messy annoying to do .but the local tilers love it .not for me .but it does work.and has worked for centuries.
When I started as an apprentice it was all sand/cement and your right it's messy, semi dry screed with a cement slurry wasn't too bad but a wet sand/cement screed with a peppering of Portland cement was dirty work. Then again it depended which tiler you were working with, some were a lot cleaner than others. They were great days, never ever short of work and you couldn't have any Tom dick or Harry stepping on your toes and taking your work. These days it is rare the Germans used to insist on monolithic fixing on floors ie aldi/Lidl, bmw hard graft but when done right you can't beat it. Lasts forever.
 
New posts

Reply to Sand And Cement As Adhesive? in the Tile Adhesive and Grout Advice area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

Just seen Rocatex on uHeat.co.uk and thought hmmm that's a new one on me. Anybody used it yet...
Replies
3
Views
2K
    • Like
Hi, I am planning on tiling my concrete garage floor with porcelain tiles. The concrete was laid...
Replies
2
Views
2K
    • Like
    • Friendly
I'm going to be installing Marmox multi boards, on two (internal walls) I'll use 4mm, just so I...
Replies
2
Views
1K
Hi All, I am wondering if someone would be able to help me out/explain something. We had a...
Replies
2
Views
2K
Hi, Soon to lay 500mm sq tiles onto screeded hall/kitchen floor 25m2. Hall floor has vinyl...
Replies
3
Views
384

Tile Adhesive Trending Topics

Advertisement

Thread Information

Title
Sand And Cement As Adhesive?
Prefix
N/A
Forum
Tile Adhesive and Grout Advice
Start date
Last reply date
Replies
97

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 5.6%
  • Kerakoll

    Votes: 17 10.6%
  • Ardex

    Votes: 11 6.8%
  • Mapei

    Votes: 44 27.3%
  • Ultra Tile

    Votes: 21 13.0%
  • BAL

    Votes: 38 23.6%
  • Wedi

    Votes: 4 2.5%
  • Benfer

    Votes: 3 1.9%
  • Tilemaster

    Votes: 22 13.7%
  • Weber

    Votes: 19 11.8%
  • Other (any other brand not listed)

    Votes: 17 10.6%
  • Nicobond

    Votes: 8 5.0%
  • Norcros

    Votes: 2 1.2%
  • Kelmore

    Votes: 5 3.1%
Top