Tool modifications - post your tips here .......

[Italy]

View attachment 103983
Every other ring missing

ok, I understood, thank you very much

 

[Old Mod]

Def not going off and yes I agree on speed . It was a 2 part so correct ratios and i did slow it down and still had bow wave effect but not so bad .

Hope you have theguard at the back and not the front haha

 

[Dumbo]

I fully understand your problem, if your using it on a deep pour say 20mm, it's so thick that the roller drags instead of rolls. I've took a few off my roller but at the ends to help it spin more freely .

Done that before .

 

[Dumbo]

Hope you have theguard at the back and not the front haha

What's a guard . Im not happy unless it's all up my legs and all up their wall .

 

[Andy Allen]

My patented metro grout float...

 

[Time's Ran Out]

Got both of them modifications.

 

[hmtiling]

I've been using a roller with much larger spikes and much further apart. It the best one I've used. I'll find a link

 

[Blunt Tool]

I’ve turned my Smaller, older Sigma 2b3 from a pull cutter to a push cutter by simply taking the handle off and turning it. Now push into measure bar as you would with a Rubi, works a treat as I don’t have the strength in wrists and painful nowadays

 

[hmtiling]

I've been using a roller with much larger spikes and much further apart. It the best one I've used. I'll find a link

https://www.amazon.co.uk/Profi-Spik...ked+roller&dpPl=1&dpID=41hWEd5qOeL&ref=plSrch

 

[david mccullough]

i used to buy those crappy gauging trowels, that have the handle welded to the blade, after one fell apart a couple of weeks after buying, i bought a smaller style marshalltown brickies trowel cost me £40 and cut about 4" off the point that was a year ago and i've abused it constantly and it's still as good as the day i bought it, almost

 

[One Day]

Cut down a BAL grout mixing tub and a 50mm hole in the top. You can ease the guard through it.
30mm hole at an angle on the side for the vac hose.
Plenty of duct tape and it works so well I didn't wear a mask!
Far better than this that I bought: