Plumbing Advice

Showerforce 2000 - anybody replaced the mixer seals? Discussion Thread

Hi
This relates to an earlier thread
I have the above old shower which leaks ; you can no longer get the Showerforce Service kit to replace the seals
so I wonder if anyone has done this job and whether suitable seals can be sourced from somewhere?
This is what the mixer seals look like ; they have worn over time allowing a leak

I really...

 

Top quality 115m basket waste in gold Discussion Thread

I'm wanting to know where I can buy 2 top quality 115mm basket wastes in gold (ones that the gold colour doesn't wear off)
One with a rectangular overflow and one without overflow.
I'm aware McAlpine have one without overflow BSWPVD.
I've looked on Plumbers-mate-sales.co.uk and they don't have what I want.

Top quality 115m basket waste in gold for the original thread on Plumbers Forums

 

Water appearing in washing machine when run kitchen taps Discussion Thread

Hi there!
When I run hot or cold kitchen tap, clean transparent water slowly appears in washing machine - this water smells - have to scoop it out! Not sure if issue is installation - washing machine is sited not far from sink (live in flat and kitchen small). Here is a picture of the piping work under my sink - any ideas why the water starts to fill in washing machine when taps are on? Could it be the inlet or...

 

W-plan pump run on Discussion Thread

Son recently moved into a 20 year old house with what appears to be a W-plan system using, I think a Worcester Bosch Greenstar gas boiler
He noticed that the rads were getting hot when the HW was on and I diagnosed the 2 position diverter valve (not 3 position valve!) was well and truly seized in the open position.
Having replaced tis expensive (£150) item HW now gets hot and the rads dont......until the cylinder thermostat temp is reached and the...

 

Electrician Boiler Fault Discussion Thread

Boiler Fault

I’m hoping someone can help with this boiler problem. Couple have just moved into a house that has a Grant Vortex combi boiler. The current setup is a two channel programmer, turn the heating on at programmer & it calls for heat at stat that then returns to CH terminal inside boiler. Hot water from programmer on is wired to DHW port in boiler. Now it all works fine heating wise when it’s only the CH that’s on at the...

 

Electrician UK Electrician looking to move to Australia 2025 Discussion Thread

UK Electrician looking to move to Australia 2025

Hi Everyone
Looking for some advice/help with contacts. I have been a fully qualified electrician for two years and I am currently working in the healthcare sector. I have previous industrial/commercial experience as this is what I done during my apprenticeship. I am now looking at possibly doing a working holiday/year or two in Australia from the...

 

Unidentified noise in party wall Discussion Thread

Hi 🙂 Please can anyone help to identify this noise in the wall between me and my neighbour? Complicated but will try to explain.
It occurs every few (7 - 10?) weeks, when it does it's very regular, every 21 mins plus a few seconds.. it's like a donkey - "squeak honk".. varies in volume. Continues for a few days like that, then stops. Sound file attached. Is this familiar to anyone??
It's only audible upstairs, in my bedroom. The...

 

Shower screen reinsert problem Discussion Thread

Hi

I had to remove the glass panels from this quadrant shower cubicle and I'm struggling to get one of the screens back in place properly. The small glass panel is supposed to slide into the wall channel, and some holes in the side of the channel (inside the cubicle) should align with some holes in the frame attached to the glass panel, allowing for some screws to go in and securing the frame in place. My problem is that the frame...

 

What torque is a gas meter test nipple tightened too? Discussion Thread

What torque is a gas meter test nipple tightened too?

What torque is a gas meter test nipple tightened too? for the original thread on Plumbers Forums

 

What torque is a gas meter test nipple tightened too? Discussion Thread

What torque is a gas meter test nipple tightened too?

What torque is a gas meter test nipple tightened too? for the original thread on Plumbers Forums

 

shrewmouse Discussion Thread

Hi everyone nice to meet you, i'm Cath, homeowner, being driven mad by an unidentified noise in the party wall.
Am waiting for my grandson to come and help me create a sound recording and will then post a description on the diy thread in the hope that someone here may be able to help identify what's happening. Any advice as to what format the sound file should be? Thanks 🙂

shrewmouse for the original thread on Plumbers Forums

 

MCPS - first post Discussion Thread

Are you in need of reliable, high-quality plumbing services? Look no further! 🚰🔧

At M.Campbell's Plumbing Services, we offer a wide range of services to keep your home in top condition, including:

• General Plumbing Repairs 🛠️
• Pipe Installation and Repair 🚿
• Bathroom and Kitchen Plumbing 🚽🚰
• Drain Cleaning and Unclogging 🌀
• Emergency Plumbing Services 🚨
• Plus more 🔍

Why Choose Us?

• Experienced and Skilled 👨‍🔧
• Prompt...

 

What we all working on this week ? Discussion Thread

I have a insurance job to try and rescue a poorly installed quad shower the customer wants to save the tiling if possible and has a few spare so fingers crossed it may work , the loss adjuster allowed em £1500 that will just about cover materials. Kop

What we all working on this week ? for the original thread on Plumbers Forums

 

Balancing Radiators Thread. Discussion Thread

How To Balance Radiators

Tool List:

Radiator-bleeding key
Lockshield valve adjuster or adjustable spanner
Screwdriver
Digital thermometer or multimeter with thermometer function

1. Make sure all the radiators have been bled. Turn off the central heating and allow the radiators to cool.

2. Familiarise yourself with the valves. The lockshield will usually have a push-on cap or one that is secured with a screw through...

 

Do I need to bother with traps at all?? Discussion Thread

I'm building a new off-grid house. I have a septic tank exclusively for WC's, but the bathroom has its own independent stone & gravel soak away which is straight into the ground and not connected to the septic, and obviously not connected to any main drains etc. Therefore, no sewer gases etc. Which makes me think - in this specific case do the bathroom fittings (sink, shower, and bath) even need traps??

Do I need to bother...

 

Looking for a cradle (Ideal Standard)!! Discussion Thread

Hi All,

I'm desperately looking for a cradle (the assembly that connects the flush unit to the cistern, in case I'm using the wrong terminology) for a discontinued Ideal Standard 2 button pneumatic system (Part number: SV93467). I really can't find it anywhere.

Can anyone recommend where I could get hold of one, or even have one available for purchase?

Thanks in advance

Looking for a cradle (Ideal Standard)!! for the...

 

Seeping pipe connection to Loft Cold water Discussion Thread

Had a problem with hammering noise coming from pipes (triggered by hot water, though it could be eased if you put the cold water on).
Went through everything i could, checking joists etc. Problem appeared to be the ballcock in the loft cold water tank.

Ive replaced it but for the life of me i cant stop seepage out of the nut for the main connection. Though ive only tried
1. Going tighter, getting to the point i'm not...

 

Water hammer/noise from pipework at night? Discussion Thread

I attended a Job where the customers complained about noisy pipes more often late at night bur sometimes in the day. While I was there, there was no issue but the combi boiler was set to preheat and they said they usually put the washing machine on late at night.

With their permission I turned off preheat to the boiler and added a mini shock arrestor on the cold feed to the boiler near to where they were hearing the...

 

Aqualisa electric shower, mains water entry point blanking plug Discussion Thread

Hello, Im looking for help in tracking down a replacement part for an Aqualisa Energy 10.5 Kw Shower. The bit that has started leaking is the top facing mains entry point- Im using the bottom entry point.
Ive attached a few pics of the part in question. It has the grey sleeve in the centre of which sits the slotted point for extraction.... I cannot seem to source this anywhere so any help will be greatly...

 

need a new shower but my hot/cold pipes are reversed! Discussion Thread

Hi All
I need some advice as to a replacement power shower and there are a few problems
I have posted a photo showing the old unit ( a ShowerForce 2000 ); it has supply pipes which run down from the roof and into the left side of the unit as shown

The big problem is that the hot and cold are reversed ie the hot is on the right and cold on the left
I have heard that it is possible to get a reversed cartridge? that...