H
hillhead
Work is work tubs.i started a full house today and am getting what i asked! Hope i get too.lol.go for it anyway at a price your happy with.
Tilers Forums Official Sponsors
P
Perry
£17 :yikes: about £20 inc :yikes: for a small job :yikes:with 5m radius circle in middle of floor (all tiles are pre-cut for circle),will be using mapei, adheisve/grout and Genesis or schluter movement and finishing trims etc
Last edited by a moderator:
P
Perry
I think it sounds a little cheap no wonder i aint got nowt lol
D
diamondtiling
Those rates have bombed in the last 3 years if £17 is being offered. Mine was £30 all day long and never had an issue. Very strange for it to be tile on tile, I would not do it. You have to give a written guarantee when its finished.
Schulter expansion joints are the norm and you have to fit the curved trims, these are screwed down every 400mm. We did all the cuts ourselves on the curved areas the same as Merle. I would at least try to lift a few tiles before starting to inspect the floor beneath.
Are you contracting to Adonis construction ?
Schulter expansion joints are the norm and you have to fit the curved trims, these are screwed down every 400mm. We did all the cuts ourselves on the curved areas the same as Merle. I would at least try to lift a few tiles before starting to inspect the floor beneath.
Are you contracting to Adonis construction ?
T
tubs
No contracting , dealer phoned me direct
P
Perry
That sounds about right all in :8:Those rates have bombed in the last 3 years if £17 is being offered. Mine was £30 all day long and never had an issue. Very strange for it to be tile on tile, I would not do it. You have to give a written guarantee when its finished.
Schulter expansion joints are the norm and you have to fit the curved trims, these are screwed down every 400mm. We did all the cuts ourselves on the curved areas the same as Merle. I would at least try to lift a few tiles before starting to inspect the floor beneath.
Are you contracting to Adonis construction ?
merlecollins
TF
No mate, a lot were direct to European Motor Holdings, a few direct to dealers and the rest to builders like to Adonis Construction
T
TT Tiling
hi all my first post in here , sounds good money to me ,down here on the devon cornwall boader im only getting 15-16 per meter on most things ,slate im getting 18-20 per meter , to many diy-ers down here ,but go 50 miles up the road to exeter they and on 25-45 for slate
There are similar tiling threads here
Featured Threads
-
- F
- W
-
- I
-
-
-
-