Kitchen Floor Ply Base

[Stef]

Sbr ***

BAL SBR is only a primer.

 

[terrycoe1]

I'm not sure I can get hold of the pre mixed down here so if I can only get the sbr I'd have to mix it with a addy!?

 

[Flintstone]

I've not mixed one up for a while but isn't I think it's 50 50 mix, acrylic primer and water then a handful of adhesive

 

[Stef]

I'm not sure I can get hold of the pre mixed down here so if I can only get the sbr I'd have to mix it with a addy!?

Yeah, rapid set adhesive mixed with sbr.
Easy to make up & brush it onto the floor.
Don't use water, only sbr & adhesive.

 

[terrycoe1]

Going back to the kitchen with ply just jotting the quote up now I'm allowing 4 days 7/8m2 total I'm guessing the rip up and prep will take me a day to do Wats your views !?

 

[Stef]

Going back to the kitchen with ply just jotting the quote up now I'm allowing 4 days 7/8m2 total I'm guessing the rip up and prep will take me a day to do Wats your views !?

Should be ripped out in a day, depends whether the ply is nailed or screwed.
I use a big mutt pro & a little mutt, both from ScrewFix, they will batter through the nails & prise the ply up.

 

[Flintstone]

Up and re boarded in day 1. Tiled in day 2, grout in day 3 and home for lunch.

 

[terrycoe1]

Somthing like this what would you be looking at charging

 

[terrycoe1]

Home for lunch

 

[terrycoe1]

I wish I come home to graft at home !haha

 

[Flintstone]

For the 8m floor? Including taking up old tiles and ply and re boarding. For me 400 - 450 labour. Plus materials

 

[terrycoe1]

I'm slightly higher but I'm allowing another day I recon I'd break into a 4th just to replace kickboards clean up tiles as in buff up the kitchen is a l shape so there's a couple tricky cuts prob will be setting out in brickbond also

 

[terrycoe1]

Could I mix this primer with a rapid set flex bagged addy!?

 

[Flintstone]

Yes. And put it on with a roller ideally

 

[Stef]

I've only ever used sbr for a slurry coat, suppose you could use it.