Kitchen Floor Ply Base

[terrycoe1]

50/50 mix !?would a ceramic or porcalin stick to this type of base with out priming!?just so I no for future jobs

 

[Stef]

I've tiles straight to it & also primed it then tiled.
Depends how long it's left for before tiling & if any dust or that gets on the surface.

 

[Qwerty]

Could I mix this primer with a rapid set flex bagged addy!?

View attachment 80768

It won't mix up as well as SBR. I tried it once to see and it didn't mix up well or roller on very well either. Get SBR and do it the right way would be my advice

 

[MW Smith Ceramics]

Just brush on a slurry coat of adhesive, let it set & your good to go

 

[MW Smith Ceramics]

I've tiles straight to it & also primed it then tiled.
Depends how long it's left for before tiling & if any dust or that gets on the surface.

I've also primed & tiled onto bitumen & I've never had any problems..........just wouldn't latex onto it, slurry coat first - ( always )

 

[MW Smith Ceramics]

I think you could also use Mapei Eco prim grip, would just check that with Mapei technical first just to be sure.....