Naughty Dot & Dab! Tiling on Grand Designs

[Stef]

Re: Naughty Dot & Dab!

If its cheap ply it will delaminate. It's too thin.
I would be surprised if the ply was much cheaper than cement board.
I still tile onto 6mm ply with a house builder I do work for, he knows its not suitable & he also knows that if there's a failure then it's down to them & not me..

 

[AliGage]

Re: Naughty Dot & Dab!

15mm ok mate will keep that in mind... will the 5.5 be ok u think? Cheers

Ash seriously?

 

[Mr Tiler]

Re: Naughty Dot & Dab!

I wasnt sure what thickness to use the ply cost 60 quid for 9m2.... i will always remember to use a thicker ply if not cement boards from now on and if this floor fails i will replace it... sorry ali lol. Ive screwed it down at 200mm centres is this better or worse for the wood? It seems ok so far and am now getting worried... im just trying to think of the best ways to prep as its all in the prep aint it.

 

[AliGage]

Re: Naughty Dot & Dab!

The amount of time you've spent on this forum, reading, learning as you say and you use 6mm ply? Seriously dude

 

[Martyn Leeds]

Re: Naughty Dot & Dab!

As above.

Seriously taking the Michael with the ply.

Fingers crossed it will fail before Christmas and you'll then have the hassle of replacing it all at your cost. That might burst the tiling dream bubble thing.




Lol

 

[EverDon Tiling]

Re: Naughty Dot & Dab!

Ffs tea bag been looking at your posts you've been posting for a few months, you've been told so many times how to prep I get the feeling your not a tiler or never going to be. Cover your trowels in dust and leave them were they are, and leave it to people that know there trade it riles me to think people like you are trying to take our work. Bit harsh but not only me is thinking this we work hard and most of the time get no appreciation don't think you will get it by posing as a tiler enough said sorry for being true full.

 

[Mr Tiler]

Re: Naughty Dot & Dab!

I didnt realise the ply had to be so thick when overboarding i thought it was when your laying straight onto the joists... sorry if ive offended people by gettin it wrong suppose its a mistake i l learn from.

 

[AliGage]

Re: Naughty Dot & Dab!

So you searched the forum for what thickness to use?

 

[EverDon Tiling]

Re: Naughty Dot & Dab!

Sorry for being harsh but you've read so many good posts by some of the best tilers in the country and still get it wrong. I started by tiling my own bathroom and thought that went well and started my own business. I never made a decent profit for years I'm now fully qualified well nvq 2 but that don't mean anything IMO. Pride dedication and on my case as as many others OCD May play a small part. After 12 years in the trade I'm happy in what I do and so are my customers and there 5 year guarantee if your just that little bit unsure then you shouldn't be doing it.........

 

[EverDon Tiling]

Re: Naughty Dot & Dab!

Rant over my drink tonight is home brew🙂