Discuss Price Check in the Australia Tiling Forum area at TilersForums.com.

J

J Sid

Will put on my flame proof suit but I'd be able to come in at 1300 and still make a good day rate at 3.5 days work.




Peter, if you can do all that in 3.5 days and be happy with a day rate and do it properly, then can i have some of whatever you are smoking or snorting please....

I work on about 6m2 a day when working out a time scale for a job, so would be looking at 7 to 9 days on that job, without see it, from start to finish.
 
M

m3fitter

£2,500.00
labour £1,680.00 ( 180.00 latex + £1500.00 fixing )
materials £820.00
3 - 3.5 days ( the half day is latexing )

** as far as i'm concerned dayrate only comes into effect with work you can't earn on, ie: splashbacks
what we earn is dependent on how good and quick you are, and bears no comparison, to how much you should earn, we work on price for a reason, ie, some people take longer than others, if you are fortunate enough to be quick and good, then that's the game ;-) if somebody asks me my dayrate, I say " I work on price ( full stop ) "
 
P

Peter

Peter, if you can do all that in 3.5 days and be happy with a day rate and do it properly, then can i have some of whatever you are smoking or snorting please....

I work on about 6m2 a day when working out a time scale for a job, so would be looking at 7 to 9 days on that job, without see it, from start to finish.

I'd love to be able to make a living doing 6m a day but unfortunately NI rates of £12-15pm wouldn't allow it and we need to get the finger out and be doing 15-20m a day. Couldn't imagine a morning of latexing and a 50m floor ever taking 9 days.
 

Andy Allen

TF
Esteemed
Arms
18,290
1,318
Gloucester
Peter, if you can do all that in 3.5 days and be happy with a day rate and do it properly, then can i have some of whatever you are smoking or snorting please.... 

I work on about 6m2 a day when working out a time scale for a job, so would be looking at 7 to 9 days on that job, without see it, from start to finish.

do you only work mornings..:sofahide: lol
 

widler

TF
Esteemed
Arms
2,334
1,328
England
I'd love to be able to make a living doing 6m a day but unfortunately NI rates of £12-15pm wouldn't allow it and we need to get the finger out and be doing 15-20m a day. Couldn't imagine a morning of latexing and a 50m floor ever taking 9 days.

6m2 a day is going some , i can understand it on a wall, with 2 windows , loads[ of pipes and mosaics, but a 50m2 floor , id be falling asleep .
Julian, i aint being bitchy mate, wish i could get your rates
Ive just done 80m2 floor last week, on my jack jones, you can see what it was like on the monday in photos,had it SLC on monday and tiled and grouted by thursday and int pub to watch them overpaid morons get beat again , id be minted on £40m2 (as long as i don't get pulled on the roughness and lippage )
ujytajy8.jpg
8uba6y2y.jpg
e2unaja2.jpg
a7a6ureg.jpg
ugegyzyq.jpg
usedu6yj.jpg
e6udevyz.jpg
 
J

J Sid

I did not say i did 6 m2 a day, i said i work on 6 m2 a day for the over all job.
For the job posted.....
Day 1... Collect 25 bags of adhesive plus self leveling and grout if colour know. Stick down ufh and self level if floor is clean and primed, if not lift wires and do properly. Clean floor of contamination ( plaster etc.) vac and prime.
Day 2.... Finish of what was completed from day 1. Remove doors, cut door stops etc., set out and load out some tiles, adhesive.
Days 3,4,5,6... Tile floor, flat level and lip free, with the planks tiles supplied, 12 m2 per day. Do sample grout colours for customer to make there choice.
Day 7....clean and grout floor.
Day 8... Re hang doors, clean floor and silicon around and tile to skirting and kitchen unit where cracks will appear and to give expansion for floor.

As i said, its all about the finished job and service given.

Andy i do start clearing up for the day at 3:30 to leave about 4. Nice to have a home life as well.
 

Sean Kelly

TF
Arms
647
1,068
Ruislip
To be honest my quote did not include doors or siliconing. 13sqm of slc = 5 bags of powder + latex. I also went for 15 bags of adhesive. All this was based on a job I have not seen. Julian, your approach to the job is very methodical.......I like that.
 
J

J Sid

Thanks Sean, I did try and price this job as unseen like yourself. I also tried for worst-case. Rough floor etc. if they were 300 x 300 tiles on a perfect screen, no doors or skirting's then yes i would drop the price a little and do it in 3 to 4 days.
Yes i can fly when the job is right, in my younger days once did 106 m2 in a 22 hour hit. To old for that now......
Now i am for quality and customer satisfaction and i like to leave a job knowing i could not do it any better.
There is enough work out there for all types of tiling. I like to do the higher end work nowadays and do try to stick to stone if i can
 

widler

TF
Esteemed
Arms
2,334
1,328
England
I did not say i did 6 m2 a day, i said i work on 6 m2 a day for the over all job.
For the job posted.....
Day 1... Collect 25 bags of adhesive plus self leveling and grout if colour know. Stick down ufh and self level if floor is clean and primed, if not lift wires and do properly. Clean floor of contamination ( plaster etc.) vac and prime.
Day 2.... Finish of what was completed from day 1. Remove doors, cut door stops etc., set out and load out some tiles, adhesive.
Days 3,4,5,6... Tile floor, flat level and lip free, with the planks tiles supplied, 12 m2 per day. Do sample grout colours for customer to make there choice.
Day 7....clean and grout floor.
Day 8... Re hang doors, clean floor and silicon around and tile to skirting and kitchen unit where cracks will appear and to give expansion for floor.

As i said, its all about the finished job and service given.

Andy i do start clearing up for the day at 3:30 to leave about 4. Nice to have a home life as well.
Well your going to get some poo now pal, taking off your own doors and re hanging them .
Bloody multi traders
Like i said julian, i aint being bitchy( not sure if some of your comments are,ie high end tiling/lip free and a few more )
Last week was a work away ,glasgow,i had to be back by friday lunch as it was my youngest birthday , so pick her up from school and take her and mates out .
Im also a finish as early as i can man , family/social life to me is more important than work
 
J

J Sid

Widler, no not being bitchy at all, sorry if it came across like that.

Am going up in the world now, first time being a "multi trade".

Yes, there is more to life than working to 6 or 7 o'clock in the evening, as i hear about so often.

I really don't think my prices are high, yes i do lose some job because of cheaper prices, but have also lost jobs because i was to cheap.
You need to find a price level you are happy with to be able to keep busy and earn enough money to live a life style you are happy with.
 

Reply to Price Check in the Australia Tiling Forum area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

    • Like
30m2 of floors, onto concrete. Conservatory ,17m2, rip up kardean , dining room 13m2, rip up...
Replies
8
Views
341
Dougs Third Go
D
W
Phoned a guy tonight about a price and is as follows... All 600x600 polished porcelain, 35m2 in...
Replies
7
Views
258
Qwerty
Q
F
Hi all I'm tiling my second kitchen, and just wanted to check in with you all that I'm doing it...
Replies
5
Views
3K
Futuregrout
F
R
hi there I'm not a tiler but my partner is (24 years in the trade). My partner has recently...
Replies
5
Views
1K
M
    • Like
Hi all Interested in views from the trade world about how I should deal with a big floor tiling...
2 3 4 5 6 7 8 9
Replies
120
Views
42K

Advertisement

Thread Information

Title
Price Check
Prefix
N/A
Forum
Australia Tiling Forum
Start date
Last reply date
Replies
40

Thread Tags

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 6.0%
  • Kerakoll

    Votes: 14 9.3%
  • Ardex

    Votes: 11 7.3%
  • Mapei

    Votes: 44 29.1%
  • Ultra Tile

    Votes: 18 11.9%
  • BAL

    Votes: 36 23.8%
  • Wedi

    Votes: 3 2.0%
  • Benfer

    Votes: 2 1.3%
  • Tilemaster

    Votes: 21 13.9%
  • Weber

    Votes: 18 11.9%
  • Other (any other brand not listed)

    Votes: 16 10.6%
  • Nicobond

    Votes: 7 4.6%
  • Norcros

    Votes: 3 2.0%
  • Kelmore

    Votes: 4 2.6%
Top