stone cladding

[Tony73]

Great pic's mate !, your a mighty mouse tony lol !!! is this the job you are going to tile the swimming pool on ??

No it's not with swimming pool. I have about 3-4 months of work on this site. Swimming pool is just 10 min. away from this one will start in 2-3 weeks).

 

[Freeze]

Hi Tony, are your fabricators producing the tiles out of the same slabs so the veins follow through, or do they just look like individual pieces of stone?

 

[Tony73]

Hi Freeze, the idea is to try to cut as many tiles out of one slab/batch, so veins follow. ideally veins would go same direction on all cut pieces. ( at least I hope, stone suppliers will try to do that)

 

[Freeze]

Looks a real nice job to be doing, crema marfil, and emprador, both nice stones, your do well not to break a few of those mate.

 

[Tony73]

Looks a real nice job to be doing, crema marfil, and emprador, both nice stones, your do well not to break a few of those mate.

yes they do go together , i'll be doing emperador vanity tops there. Crema marfil breaks easy, but I have good record for not breaking stone :lol: so hope not to break any

 

[Freeze]

Out of interest, what's your choice of adhesive mate, looks quite a deep bed on the photos

 

[Tony73]

Out of interest, what's your choice of adhesive mate, looks quite a deep bed on the photos

it's not that deep 🙂 with 20mm thick slabs you can't do 3mm bed. (stone is 22mm thick on one side and 18-19mm on other) And I usually use Mapei keraquick or webber, some times Ardex

 

[Freeze]

I have done a bit of stone over the years, so know you cant do a 3mm bed, just wondered what adhesive you were using that was all.

 

[Tony73]

I have done a bit of stone over the years, so know you cant do a 3mm bed, just wondered what adhesive you were using that was all.

Understand, you was only asking m8 . I prefer webber for deep bed, but goes off quicker. Keraquick gives bit more time to work

 

[Tony73]

here I found scratch on one slab. I think when guys took sharp edge off with polishing pad, it slipped