Protilers - Tiling In Meopham, Kent.

[Rizzle from the Portizzle]

Evening All......just home from another day in the sticks.....been great TBH........nice weather always helps.......here is what went on....

first off I finished the tanking in the master bathroom and adjusted all the lighting holes so they are level with each other:

I have to plug the hole on the bath platform (under the window)......do that tomomorrow!!!........forgot to do it tonight!!!...doh!

here is what went on in the en-suite......

I decided to re-finish the off cuts of the tiles to suit the situ, rather than getting an extra one from Ray (sorry Ray)........saves the customer a few quid and saves me HOURS!!!!!

all the best

Lee

dont worry lee i will get over it nice bit of cutting .what power is the self build client going to run through all them cables comming through the wall in a shower they look like 1.5 mm lighting cable 240 v

 

[Protilers]

dont worry lee i will get over it nice bit of cutting .what power is the self build client going to run through all them cables comming through the wall in a shower they look like 1.5 mm lighting cable 240 v

Well...........ahem.........ahem again..................

at the moment Ray they are 2.5 twin and earth.........and the lights I have seen do NOT have transformers......and even if they did.......how would they fit through those tiny,tiny holes?.......

I could go on.....but I wont.............

 

[Protilers]

OMG..........I am now (all of a sudden) feeling guilty........it did not even occur to me today as I was just trying to "get on!" (I am just the tiler!)............he has kids Ray.........and this is their room........I have to stop............OMG......talk about blindsided........

 

[Diamond Pool Finishers]

Buuuuuuzzzzzzzzzzzzzzz flashhhhhhhhh BBBBaaaaaannnnngggggggggggg !!!!!!!!!!

 

[Protilers]

Buuuuuuzzzzzzzzzzzzzzz flashhhhhhhhh BBBBaaaaaannnnngggggggggggg !!!!!!!!!!

lets just hope he says (the self builder) the transformers are already connected......otherwise....this is a major issue......OMG!

 

[ishi69]

Evening All......just home from another day in the sticks.....been great TBH........nice weather always helps.......here is what went on....

first off I finished the tanking in the master bathroom and adjusted all the lighting holes so they are level with each other:

I have to plug the hole on the bath platform (under the window)......do that tomomorrow!!!........forgot to do it tonight!!!...doh!

here is what went on in the en-suite......

I decided to re-finish the off cuts of the tiles to suit the situ, rather than getting an extra one from Ray (sorry Ray)........saves the customer a few quid and saves me HOURS!!!!!

all the best

Lee

What size tile is it Lee? Looks good.

 

[Colour Republic]

What size tile is it Lee? Looks good.

He can't tell you because it's all top secret and a risk to national security if such information is divulged in a public forum.


BTW Bri I'm guessing the tanking is Mira 4400 multicoat but could be wrong.

 

[destroyer2813]

First thoughts where those tiles a hidious colour 😳

 

[Protilers]

Evening All.......

got to the job today and here is what went on:

first off I grouted the floor......Black......there is another sponge that bites the dust!......doh!.....

next was the first bit of wall tiling.....900 x 600 polished porcel-thin..........

at this point we run out of tiles......and I had to make a mad dash to FEET!..........good to see you Ray.....but next time can it be a social vistit!!!!

all the best

Lee

 

[Protilers]

Hi Ishi...the floor tiles are 1200x600 (non slip)......the wall tiles on two walls are 900x600 polished and the other two walls are 1200x600.......all of the tiles are 4.8mm thick!!!.........